Can I put a laptop Core i7 CPU in a desktop?

Question

One of the most important thing to me for a CPU is a good mix between speed and heat. For example five years ago I bought a Core 2 Duo 6300 (max TDP 65W): I put a big heatsink on the CPU, no fans (I do hate moving parts and noise) and it worked like a charm and very silently for five years (and it still work but five years later I wouldn't mind a faster CPU and a faster memory controller and more memory).

I consider a max TDP of 130W unacceptable (like some high-end Core i7 have), for several reasons.

So I was wondering: can I build a desktop and put a Core i7 CPU meant to be used in laptop in it? For example I was thinking about the Core i7 740QM (max TDP 45W [!]).

Are these compatible with desktop Core i7 motherboards? (for example on NewEgg it says that the "CPU socket type" for the Core i7 740QM is PGA988, I've not too sure about what this is)

Answer 1

You cannot put a notebook CPU in a desktop motherboard. If you want a notebook CPU in your desktop, you basically need to put notebook components in a desk case. There are some companies that do that, but it costs a lot.

What you can probably do is buy a low-end desktop CPU that will have a low TDP. These, however, are likely to have relatively poor performance.

Answer 2

Mobile CPU sockets don't fit desktop motherbooards (in specification sheets they have a different socket type)

The newest "Sandy Bridge" chips that Intel are about to release (tomorrow) have a TDP of 95W and the latest benchmarks show that they are very fast indeed with a good performance/watt. They even have half decent on board graphics so you don't "need" a discrete GPU unless you want to play games or video edit.

link:

http://www.vortez.co.uk/articles_pages/intel_core_i5_2300_2400_2500k_sandy_bridge_review,6.html

The new processors are good value for money and you could get away with a very quiet cooler. Titan Fenrir, Thermaltake Frio or something from Noctua spring to mind, with fans set to low speed.

Answer 3

Depending on what your skills are you could retrofit a laptop motherboard into a desktop case.

An easier solution: Some mini ITX boards have socket 988

http://www.commell.com.tw/News/News/News_20100920_LV-67F.htm

http://www.globalspec.com/datasheets/2571/AdvantechIndustrialAutomation/C4B25A4F-7E4E-403B-9009-AF3E8BB89A41

http://jetwaycomputer.com/NF98.html

Answer 4

I remember a several years back someone released an atx motherboard that was designed to take a pentium mobile 1.5ghz I think. Therefore it is not out of the realm of possibility to actually fabricate your own board to accept a mobile processor, although it will be undoubtedly expensive to build a one-of-a-kind board.