Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I have an index card designed in Word. It's fairly complicated with graphics, borders and background.

The page layout has been set to landscape and with size set to 4x6.

How can I print this, 4x per A4 landscape sheet? I cannot for the life of me work it out.

The printer always seems to do a single card per A4 sheet, wasting 3/4 of the page.

"Pages 1,1,1,1" will result in 4 sheets being printed.

What am I doing wrong?

share|improve this question
1  
If your printer supports it, you could try to let it merge multiple sites on to one. –  Bobby Jan 12 '11 at 9:56
    
As dma57361 suggested you need to set as labels. However, it still probably won't work unless you have a full bleed printer. –  opsin Feb 1 '12 at 3:26
    
You could get 3 on there. Two vertical and one horizontal. –  opsin Feb 1 '12 at 3:33

3 Answers 3

For Word to be able to print 4 pages to a sheet, it needs to have 4 pages. Unfortunately you can't simply print a single page 4 times on a sheet. The answer to copy and paste is correct. :-)

Also be aware that you have two sets of print settings and these often function independently.

First is the Word Print Settings. These give the most predictable results. Here you set the number of pages to be printed on a sheet.

Second is your Printer Properties. You can also set the number of pages per sheet in here. Leave this as 1 or you are also likely to get a border around the whole lot if your single pages have a border.

Now, the Printer Properties paper size defaults to you document page size. Change it to A4, or whatever actual paper size you are using and select OK. Note that this will only apply until you load the Printer Settings again, then it will default again. (at least on my version of Word!)

Finally select Print from Word!

share|improve this answer

Tools -> Letters and Mailings -> Letters and Envelopes

From within the Labels tab click the Options button.

From here you need to configure the page to use "labels" the size of which you need. You can create new custom sized labels, which is what you probably need to do - if you do, make sure you set the page size to A4 landscape.

Then you simply place your work in each of the four labels on the page.

share|improve this answer

Copy your work and paste it three times into same Word document and then print

share|improve this answer
    
How do you do that with page borders and background art? –  Anna Jan 12 '11 at 10:08
    
just press ctrl-a , ctrl-c and then press ctrl-v three times –  Shekhar Jan 12 '11 at 10:10
    
This seems like a waste of paper and ink. –  Ramhound Apr 3 '12 at 14:55

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.