Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

When opening the document I am working on in Word 2010 this morning, the number in heading level 1 is a black rectangle:

enter image description here

however, it still look ok in the bookmark pane:

enter image description here

Weird, ey?

share|improve this question

11 Answers 11

  1. Place the cursor just to the right of the black box in any example of the affected heading.
  2. Hit and the black box should turn gray.
  3. Type Ctrl+Shift+S to bring up a style popup.
  4. Click Reapply.

This has worked every time I've had this problem.

share|improve this answer
up vote 4 down vote accepted

I solved this after all, I also noticed that someone else was unable to resolve this on a Microsoft forum, so if you read this, here is my solution:

  1. Press properties for Heading 1
  2. Press format, numbering
  3. Chose No numbering. Exit the properties. All numbering will now disappear.
  4. From the "start" pane, press multi-level-list, and then the format that looks like:
  1. Heading 1

1.1. Heading 2

1.1.1. Heading 3

share|improve this answer
    
This problem still occurs in year 2014. But your solution doesn't solve it permanently... Save, Close and Open brings back the black box –  AndroidRookie Mar 4 at 15:05

Some extra help for others with this problem (I still had this working in Word 2013 with an older "compatability mode" document.)

For me, the blacked out numbering was occuring only on "Heading 3". To fix:

  1. Modify style properties for Heading 1 - select Numbering = None
  2. Modify style properties for Heading 2 - select Numbering = None
  3. Modify style properties for Heading 3 - select Numbering = None
  4. Move cursor to text that is formatted as Heading 1
  5. From the ribbon bar, [home]>Paragraph section, select Multi-Level-List. Make sure you choose the option as above with all the Heading names listed (you may see one with first 3 levels missing).
share|improve this answer

I have had issues with this as well.

Fix was to select the numbering that is blacked out and setting the font size to something other than blank (I assume that causes the problem). Simple update heading to match selection fixes the rest of the instances.

Good luck.

share|improve this answer

It can be fix in the Outline style

Go to

Modify Style => Format => Text effects => Outline style

her the outline style should be 0 pt, which wasnt in my case

share|improve this answer

You can resolve this issue by right clicking on Quick Style heading -> rename ... After renaming the problem disapear!

share|improve this answer

In Microsoft Word 2010 Leveled Numbering list turns to black box

I searched some forums and got the fix, please follow the below points

  1. Put your cursor on the heading just right of the black box
  2. Use the left arrow key on your keyboard to move left until the black box turns grey
  3. Use the keyboard combination ctrl+shift+s, the dialog "Apply Styles" should appear
  4. In this box, click "reapply"
share|improve this answer

I spent around 5 hours trying to fix this problem and was close to pulling my hair out. I tried every fix suggested on the net (creating new multi lists and importing uncorrupted styles etc) and the problem kept returning.

The below seems to have worked for me and I hope it's a permanent solution.

  1. Firstly I did the following as has been suggested by a number of users a) Put your cursor on the heading just right of the black box b) Use the left arrow key on your keyboard to move left until the black box turns grey c). Use the keyboard combination ctrl+shift+s, the dialog "Apply Styles" should appear d) In this box, click "reapply"

  2. Once the black boxes had disappeared I saved the document as a word 1997-2003 document (document 2).

  3. I resaved document 2 as a normal word document (2013 in my case) and selected the compatibility mode option when saving (document 3)

  4. I resaved document 3 as a word document (2013) and deselected the compatibility mode option (document 4).

It seems to have worked and the black boxes have disappeared. I hope this is a permanent fix otherwise I will go back to working on document 2 (word 2003 version).

share|improve this answer
  1. Place the cursor just to the right of the black box in any example of the affected heading.
  2. Hit left arrow key and the black box should turn gray.
  3. From your Styles box re-apply the style you want to use (Heading 1)
  4. It should now show you the valid style (number visible).

When you close and open your document however this reverts to the previous style (black box). In order to prevent this, once the style is how you want it to be (number visible) do the following:

  1. Right click the number (style).
  2. Go to 'Styles'
  3. Click on 'Update Heading 1 to match selection'

Now save and close/re-open the document and it should no longer revert.

share|improve this answer

The problem is in your chosen numbering format. Just select Multilevel List for your numbering format instead of Numbering.

Home tab==>Paragraph==>Multilevel List

Then you can see your numbering format in Styles preview too. Hope it works ;)

share|improve this answer

I've been having this same problem with documents that get passed around with several people making edits and enteries. What has fixed it so far for me is that I have a template that is used for these documents with the numbering setup as styles. I just take the whole affected document and dump it into a blank template and select "Use denstination styles", and that normally fixes the problem.

share|improve this answer
    
This answer is not much help if you do not give more information about that template, so the OP can reconstruct it for him/herself. –  Jan Doggen Nov 19 at 15:47
    
I don't think that it makes much difference which template I use. I think as long as you're using a template that has the numbering styles used in the document, it will fix the issue. Of course that could change if the document continues to be passed around for comments. –  Rich Nov 21 at 18:14
    
You can, and should use comments for stuff like this. –  Journeyman Geek Nov 22 at 1:37

protected by Community Nov 22 at 1:37

Thank you for your interest in this question. Because it has attracted low-quality answers, posting an answer now requires 10 reputation on this site.

Would you like to answer one of these unanswered questions instead?

Not the answer you're looking for? Browse other questions tagged or ask your own question.