Super User is a question and answer site for computer enthusiasts and power users. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

Over the years, I've had many of the wifi routers used in my home fail. ? Is there any reason. Since there are no moving parts it seems odd they would fail so often. I've probably gone through four in about 8 years. I've had Linksys, DLink, and Netgear devices that stopped working.

Just this weekend, one stopped working. It is a linksys 54gs that I use as a wifi access point (turn off DHCP, don't plug anything into the WAN port). There has been no lightning recently, no power outages, no changes in the house. It has worked great for a year and a half, then this weekend wifi connections started to drop for hours at a time. Sometimes sporadically, the wifi connections would work. I have Wifi analyzer software on my phone and it showed a strong signal and did not show any other networks near the same channel. When I stood right next to the device, I could not get my phone to connect (or my Wii or my laptop). However a couple of hours later, they seemed to connect fine. Perhaps there is some interference I can't find, but nothing changed in my house and I didn't see any signals from my neighbors. I tried power cycles and resets, but no luck.

Any explanations?

share|improve this question
Is this device using any sort of power regulation/cleaning? Is this the same spot and power outlet? I would also, as Joel stated, look into this unit by taking it apart and blowing it out with canned air. I had a netgear that was overheating causing similar symptoms and I modded a fan on the unit and it worked fine after that for 3 years. when cleaning also check for abnormal signs of heat, discoloration on the pcb etc. – Dan M. Jan 28 '11 at 16:08
I've had extraordinarily good luck with my routers (2 wrt54g's and 1 wrt610n (no longer made, sadly)), but remember this is consumer-grade hardware. I do know that Linksys routers tend to have heat problems, but I would also suspect dirty power. – Daniel Mallott Jan 28 '11 at 16:30
Check the answer here for some more details… – MasterHD Jun 2 '15 at 16:39
up vote 4 down vote accepted

Electrolytic capacitors don't last forever. They are used in the power regulation part of the circuit and usually are the components that die first. But still, they should not fail in only a couple of years. There was a scandal a few years ago where a capacitor supplier produced faulty capacitors for a few years. I had a motherboard that died because of this, and maybe you had some routers that had these faulty capacitors.

There could be other reasons. In my personal experience, I had a router go out on me one summer because the AC/DC adapter died. It was a particularly hot summer, and some components in the adapter (maybe some capacitors) slowly went bad. With no load, it was able to reach its target of 5.2V, but as soon as any current was drawn from it, the voltage would drop and the router would behave unreliably. It was not obvious to me that this was the problem until it completely died and I bought a universal power supply and set it to 5V, and voila, it worked like new.

It could also be heat. Electronic components work more reliably when they are cooler. You should make sure that the router is not in a place where heat gathers.

share|improve this answer
+1 Faulty power supply and overheating are biggest issues. – Chris Nava Jan 28 '11 at 19:54

If Wifi Analyzer shows a strong signal, it's not the radio and it's not interference - it's the device processing the signals. Some things to check for:

  • Make sure you have the latest firmware
  • Make sure the device isn't overheating / is stored in a cool place
  • Make the sure the connection to the upstream device is working
  • Try just restarting the device

I have a router that's starting to go as well. To prolong it's life, I put it on a $3 christmas light timer. This has worked like a charm - it shuts down for 15 minutes in the middle of the night each day when I'm not using it, and this has greatly increased stability. Of course, my router is 6 years old going on 7 rather than just 18 months, but the principle still applies.

share|improve this answer
It sits in my basement crawlspace. Very cool and dry. Upstream connection is good. It uses a switch and the wired computers on that switch are fine. I restarted multiple times. The timer idea is a good one, but why would that be necessary? – Michael Levy Jan 28 '11 at 15:37
Crawlspace, eh? I bet if you opened the device you'd find a fried insect or arachnid on the circuit board. – Joel Coehoorn Jan 28 '11 at 15:39

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .