Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

My System Fujitsu Siemens Scaleo P cannot boot windows and doesn't proceed after display of Fujitsu Siemens Logo (Where it says Press F2 to Enter Setup).

The System has USB only port for Keyboard and Mouse but Keyboard isn't detected (No power on Keyboard LEDs). Any help please?

share|improve this question
add comment

2 Answers

up vote 1 down vote accepted

Have you tried another keyboard? Another USB port? Maybe the system is waiting for the keyboard. Without the keyboard there is not much you can do. You can reset the CMOS from the jumper located on the motherboard or removing battery and power from your PC for 10 20 minutes. Have you tried anyway to press f2 to see if it get you into the Bios Setup?

Cheers.

share|improve this answer
    
Resetting the CMOS worked! thanks :) –  Jasmine Appelblad Feb 5 '11 at 17:30
add comment

I would run a memory tester

http://www.memtest.org/

Download the prebuilt ISO, burn it to CD as an Image (not data), boot from that CD and run the memory test for a couple of hours or overnight to stress test the memory.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.