Super User is a question and answer site for computer enthusiasts and power users. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I purchased a new Mac mini server, since my old iMac, which was a server pretty much died. My problem is this. How do I change my internal IP address for my mac mini server to a static address, like

Before you guys harp on me, my old server was running Ubuntu Hardy and I only had to map the IP address in the router, which would automatically assign the reserved address through DHCP. Now, I know things are different between the two, but my problem is that the mac is not accepting the assigned IP address or the router just is not assigning. However, every time I have manually changed it on the Mac to an address of my choice, it takes the computer off the Internet. My router is a NetGear WTG624 v2, I believe.

I need this to work, so I can utilize Dynamic DNS.

share|improve this question

migrated from Feb 3 '11 at 1:55

This question came from our site for professional and enthusiast programmers.

Should be moved to Apple.SE? – Soumya Feb 2 '11 at 23:32
@Soumya: I voted to move it to -- this is more of a general router config question, rather than something specific to a mac. – Jim Lewis Feb 2 '11 at 23:49
@Jim I thought the OP was asking for directions on how to configure the IP on a Snow Leopard machine. Either way, it should not be here. – Soumya Feb 2 '11 at 23:55

Did you update the router config with the MAC (ethernet hardware) address of the new machine? Otherwise it will probably give you an address out of its dynamic pool.

You should be able to disable DHCP and self-assign an appropriate static IP address to your Mac. If it doesn't work, that also sounds like a router issue. Are you using the same static IP address previously assigned to the other server? That might be the problem, if the router thinks that IP address is locked to the old machine's MAC address. If you're using a different IP address, you'll have to change the router config so it knows how to route the traffic from the public side to the private side of your LAN.

share|improve this answer
Yes, I am, since that is the address that I have the router forwarding to the ports towards. I erased the previous entry in my router's DHCP table and tried to tie it to the MAC address of the new machine, but the Mac would just keep getting a different IP address. – bac Feb 2 '11 at 23:57

You must log in to answer this question.