How to properly merge two tables in MS Word

Question

This could be the dumbest question ever. But I would ask it anyway. Because I'm really pissed of at how MS Word 2010 handles what I really want to do. In this case merge 2 tables together. I do the usual drag and drop but I'm out of luck:

Please help, I'm stuck at this. I don't know if my mouse if the problem but even if I use the touch pad I still get this crap.

Answer 1

From allexperts.com:

There are a few things you can check on:

1. Make sure that the second table doesn't have any rows marked as heading rows.

2. Make sure that neither table is wrapped (wrapping should be set to None on the Table tab of Table Properties).

3. Make sure that neither table (even if they appear identical) is nested in one large cell of a containing table (this sometimes happens with material pasted from the Web).

That said, I can tell you that I once had two tables--which I had created myself, so I know there was nothing unusual about them--that just refused to merge, for no apparent reason. It's possible that the table structures were somehow damaged, and if I'd been doing this in Word 2003, perhaps using Open and Repair would have fixed the problem. As it was, it wasn't vital that the tables be actually part of the same table, so I shrugged and moved on.

If you encounter such a situation, you have really only two recourses (if Open and Repair doesn't help):

1. Add rows to the first table and copy/paste the content of the second table into them.

2. Convert both tables to text, then convert all the text back to a single table.

Sorry I can't be more definitive, but this is a mystery to me, too!

Suzanne S. Barnhill
Microsoft MVP (Word) 1998-2006

Answer 2

Similar situation I had was resolved by adding a blank row to the bottom of the upper table and a blank row to top of the lower table. Neither of these two new rows should have columns and both tables should be the identical width. Then, by removing any returns (blank lines) between the two tables, they should automatically join. Afterward, you can remove any unwanted rows.

Answer 3

I just had a situation where my table was breaking with the cells before the bottom of the page and leaving a blank spot at the bottom of ONE PAGE in just ONE SECTION of a 30-PAGE TABLE. I did all of the checking/unchecking that is mentioned here and at other advice boards, but to no avail.

After about an hour of beating my head against a wall I calmed down and just methodically went though every option available relating to the table and noticed that in the cell that should have been broken into the bottom of one page and the top of the next (but was instead getting moved to the next page in its entirety) had a specified height (Table Properties/Row tab). I removed it and instantly the table started breaking with the page as I had been after.

So, all that is to say - another option you should check if you're encountering a situation where one cell of an otherwise-compliant table won't break where it is supposed to - see if there's a specified height to the cell in the Row tab under Table Properties.

Good luck!

Answer 4

Quite often you’ll find that you have two tables in a Word document and you want to join the two together to make just one table. The solution is simple but way from obvious.

To do this, first select over all the cells in one of the two tables. If the table is underneath the one you want to join it up to, then press Alt + Shift + ↑ to move the table up the document so that it joins the bottom of the table before it. Keep pressing the key until the top row that you have selected joins the bottom border of the one above.

If you have selected the topmost table, then press Alt + Shift + ↓ until the top table locks onto the table below.

You can also drag one table up or down until it joins but this method is very slick. It also works on a single row so you can take one row from one table and move only it to join up with another table or to become a table all of its own. Experiment with this key combination – I’m sure you will love it.

Once you’ve done this, the tables will be joined to make one single table. If desired, you can then adjust the positioning of the columns so that the columns match between the two tables – this isn’t required but you may want to do it if the columns are supposed to be the same throughout.

Answer 5

I found if I individually converted all the tables to text, separated by tabs using:

Table Tools / Layout/ Convert

to text then selected all the text and converted to tables using:

Insert / Table ↓ / Convert Text to table

that it worked for me.

Answer 6

First thing I tried was checking row height - it worked !!! Thanks to the person who posted that tip.

Windows 10 Under Tables - Layout, go to Cell Sizes. Click on Row and then uncheck Specify Height and in Row Height is ... put "at least" and under Options, check "allow row to break across pages".

From a happy camper