Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I've just installed Win7 Ultimate to my PC. During the install it reboots a couple of times, but 2nd or 3rd reboot I see the "Starting Windows..." message, but followed by a black screen. No mouse cursor, taskbar, anything. The monitor power light is blue (indicating it has a signal) and it was displaying the setup wizard with no problems whatsoever.

Has anyone else witnessed this phenomenon?

Many thanks in advance.


I booted in safe mode, and got a screen saying "Setup is preparing your computer for first use". That's brilliant, although a message box has popped up over that saying:

Windows cannot complete instlalation in Safe Mode. To continue installing Windows, restart the computer.

So I don't really have the opportunity to do any cleverness with drivers or anything. I guess I could try getting a different version of Win7 (I'm installing from an MSDN DVD).

share|improve this question

I have only seen this a few times, typically with hardware failure. (Windows setup loads a graphics driver for a faulty graphics card - SVGA/standard driver works, using the real driver fails).

All I can suggest is try booting in to safe mode and update all drivers, or perform another fresh install and cross your fingers!

share|improve this answer
+1 for the safe mode suggestion. It got me a bit further but not all the way (I've updated my question with my findings). – Neil Barnwell Feb 4 '11 at 14:50
ok, with that updated info, I would start setup again, I think it simply failed.... Also, try looking at the setup log if you go to the command prompt during the next setup run. – William Hilsum Feb 4 '11 at 14:52
Ahh right okay. I've done this twice now with the same results. What's the path/filename of the setup log? C:\setup.log? – Neil Barnwell Feb 4 '11 at 14:54
up vote 0 down vote accepted

Actually I was just browsing the related questions on the right hand side, and found this:

Windows 7 blank DVI screen

The answer was in there - I had two monitors hooked up, and when I disconnected the secondary one and rebooted, it all worked fine!

share|improve this answer
Yea, I've noticed that Win7 has some real issues with video, especially with older hardware. When I upgraded my old HP laptop to Win7, it kept trying to install the wrong video driver, giving me the frequent black screen. I finally was able to hack in the correct driver and it has worked great since. – BBlake Feb 4 '11 at 16:50

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.