Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

If you remove a cartridge from an inkjet printer for longer, cartridge nozzles will dry out so you'll need to clean them in some way or buy new cartridge. Is there something that can happen to the printer itself when there's no cartridge in it?

I've just installed a new cartridge with black ink in HP PSC 1210 printer after the old one has been removed for a couple of days. I was able to print as few as 5 pages of text and then the black ink stopped appearing on sheets (printer was trying to print as if nothing happened). I don't know if I should blame refilled cartridge provider (for poor quality of the cartridge) or myself (for leaving a cartridge slot empty for several days).

share|improve this question

2 Answers 2

up vote 2 down vote accepted

Leaving an printer cartridge slot empty does not cause any problems.

A good deal of printer manufactures ship their new printers with no cartridges in the slot, and require the user to install the cartridges (provided in a vacuum sealed bag) before using the printer.

share|improve this answer
    
So it sounds like the OP should store the cartridge in a vacuum sealed bag when not using it. Maybe a Ziplock bag would do? –  FrustratedWithFormsDesigner Feb 10 '11 at 16:37
    
Don't vacuum seal the bag - any reduced pressure in the bag may cause the ink to leech out through the nozzles or the pressure vent. –  Linker3000 Feb 10 '11 at 17:23
    
Edit for above ^^ When the manufacturers shrink wrap the cartidges, they leave just the right amount of air pressure in the bag to avoid leakage. –  Linker3000 Feb 10 '11 at 17:30

When the ink cartridge is parked in the printer, it is usually capped with a rubber/synthetic stopper to prevent the nozzles from drying out. Some manufacturers used to do a cartridge station to store spare cartridges when they were not in the printer and these had a similar arrangement, but if you can't get one of these, the best option is either to store the cartridge in a zip-loc plastic bag (not vacuum sealed) or gently wrap the nozzle area in some cling film/saran wrap to prevent them from drying out.

If the heads do dry out you can sometimes flush them with distilled/deionized water. I have heard that pure alchohol (not rubbing alcohol with water in it) can be used, but not having tried it I leave this as 'at your own discretion'

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.