Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

My front side bus (FSB) is rated for a maximum of 400mhz (Rated FSB 1600MHz). In fact, it used to run at 400mhz until recently.

I'm trying to overclock my E8400 to 3.6GHz. I have done that in the past by having the FSB at 400 with a multiplier of 9.

Now, when I set the FSB to 400, the system boots as normal, but the FSB stubbornly is stuck at 333 (Rated FSB 1333). The CMOS is set to 400, I've triple-checked it. It's just the FSB isn't listening.

Is my FSB damaged?

Gigabyte mobo

share|improve this question

1 Answer 1

up vote 1 down vote accepted

I am a bit confused, the FSB for a E8400 is 1333mhz.

Double check all your hardware and motherboard manual to make sure you are actually using a supported configuration.

share|improve this answer
    
Thanks, Wil -- I'm using a supported configuration. I'm referring to the Bus Speed. Sorry for the confusion. Bus Speed 333MHz = Rated FSB 1333 and Bus Speed 400MHz = Rated FSB 1600MHz. –  Mantis Feb 12 '11 at 15:07
2  
ARGH, you are talking about memory speed vs CPU fsb... If I was you, don't overclock! you just shorten the life and you don't gain that much! –  William Hilsum Feb 12 '11 at 15:09
    
Not about memory speed, I don't think. The FSB says one thing in BIOS, and says another in POST and in CPU-Z. That's what I'm talking about. I hear you about shortening lifespan, which is why I'm concerned my FSB might be damaged. –  Mantis Feb 12 '11 at 15:18

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.