Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I'm looking to understand whether adding a new 1TB HDD would make my computer slow. My specs are as follows:

  • 500GB Seagate ST3500418AS SATA Core 2
  • Duo E8200 @ 2.66GHz
  • 2GB RAM DDR2 333MHz

If yes, would adding two new RAM modules of 2GB each (@ 800MHz) make it better? I'm just looking for personal experiences/linked articles, anything which would illuminate me.

share|improve this question
    
The Mhz have to match. Tbh if you're asking this sort of question, you're more likely to have a virus. Get Microsoft Security Essentials if you don't already and do a scan. –  tobylane Feb 12 '11 at 17:44
    
@tobylane: My current system isn't slow and I think that with a software f/w + anti-virus suite I'm good as of now. Just wanted to know whether having a new HDD might slow the way I do my daily chores. Also, regarding the RAM, I'm thinking of discarding the current 2 GB one and get two new sticks. :) –  sasuke Feb 12 '11 at 18:04
    
Do you want to add another HDD, or replace the one you have? –  Daniel Beck Feb 12 '11 at 20:49
    
@Daniel: I would like to add a new HDD to my system. –  sasuke Feb 13 '11 at 16:33
1  
@sasuke: In that case, JamesT is right. The disk alone will not slow your machine down, only the countless files you can use that disk for (e.g. through desktop search indexing processes). –  Daniel Beck Feb 13 '11 at 16:36

1 Answer 1

up vote 4 down vote accepted

It won't slow your system down. It won't increase the demand on the RAM or the CPU. it may take longer to navigate your folders but that is solved with good organisation.

Even if it would slow your system down 6GB RAM is a bit excessive.

When choosing a new hard drive, make sure the only difference between it and your primary one is the size of the storage.

share|improve this answer
    
I'll be discarding the current RAM stick so it'll be 4 GB total. Also, why do you say the speed (I assume RPM) has to be the same? Anything which proves not having them same would cause problems? Thanks. –  sasuke Feb 12 '11 at 19:22
    
the RPM has to be the same. The power rating needs to be in the range of your PSU so its safer to get one with the same or similar prower rating. –  JamesT Feb 12 '11 at 22:41
    
Thanks for the help, marking this as an accepted answer. Off to buy a new HDD. :-) –  sasuke Feb 20 '11 at 6:25

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.