Super User is a question and answer site for computer enthusiasts and power users. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

This question already has an answer here:

I have a laptop that says it needs a 19V 3.42A power supply. I have a Dell 20V 4.51A power supply.

Can I use this power supply with my laptop, or will it destroy the machine?

share|improve this question

marked as duplicate by Ƭᴇcʜιᴇ007, fixer1234, DavidPostill, Deltik, mdpc May 5 at 22:34

This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.

Electronic equipment is typically capable of handling voltages of a nearly 20% difference. As for the current, the laptop will only draw what it needs. If the PS was lower I'd worry, as long as it's rated higher than needed by the laptop you're ok.

share|improve this answer

As long as the connectors are the same size and the polarity of the connectors are the same then everything should be fine. Some generic laptop power supplies have a rated output of 19-24v so as Tom Strike says, electronic equipment can generally handle some difference - and 19/20v are pretty close.

share|improve this answer

Most probably it won't destroy your laptop. Even though, I can't recommend using it, as then someone might say I am responsible, if something goes wrong. If I had same case, I would try Dell power supply.

One volt difference isn't critical, as laptop usually tolerances rather high differences (plus minus several volts). Side effect may be that laptop gets little bit warmer.

share|improve this answer

Not the answer you're looking for? Browse other questions tagged .