Super User is a question and answer site for computer enthusiasts and power users. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I'm building a NES PC casemod and want to use the RCA jacks in the case for the audio connection. I'm using the Intel D945GCLF2 which has motherboard pins for front-panel audio as well as S/PDIF audio.

What would you suggestion doing in this case? It seems to be easier to wire the front-panel audio pins to left/right RCA jacks but is it as simple as wiring the signal/ground or do I have to convert the audio signals from digital to analog?

Has anyone done any motherboard audio wiring who could shed some light on this for me?

share|improve this question
up vote 1 down vote accepted

The motherboard PDF reference you link shows a Audio header reference on the last page.
These are for wiring to a cabinet speaker.

If you want to extend Stereo output over two RCA jacks,
I think connecting them internally to the Front Panel header
(integrated HD, numbered '7' on page 3)
over the front-left and front-right jacks would be suitable.
This can be done with an extension wire or manually wiring through the signal/ground paths.

You can change the HD Audio configuration to use Stereo output (rather than 5.1) later.

S/PDIF is usually a digital path.

share|improve this answer
    
Good show. Thanks very much! – Zack The Human Aug 19 '09 at 5:42

Normally it will be analogue audio, and the wiring would be simple. It's possible that there could be pins for S/PDIF on the motherboard, but I expect they would be labeled as such.

It's hard to say any more without knowing what motherboard it is.

share|improve this answer
    
I was thinking of testing the audio connections to see what I get. There is a link in my question to the motherboard's technical specification document. There are both front-panel and SPDIF pinks on the motherboard. – Zack The Human Aug 19 '09 at 0:30

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .