Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I'm working on installing django and running it on my system.

I have a problem though, in this tutorial creating a project is explained by running the command startproject mysite

My issue is that this doesn't work. I changed to the directory where is located and ran the command

chmod +x

with no results. I tried adding the directory with the file to my path without results. I ended up fixing my problem with this command

python /location/of/ startproject mysite

which yielded the outcome I expected. My problem is: What do I need to change/configure such that command startproject mysite

would be sufficient?

Here are some experiments:

21:09~/Desktop/HI/NSN/Polls > startproject mysite
-bash: command not found
21:09~/Desktop/HI/NSN/Polls > ./ startproject mysite
-bash: ./ No such file or directory
21:09~/Desktop/HI/NSN/Polls > python startproject mysite
python: can't open file '': [Errno 2] No such file or directory
21:09~/Desktop/HI/NSN/Polls > /opt/local/lib/python2.4/site-packages/django/bin/ startproject prufa1
-bash: /opt/local/lib/python2.4/site-packages/django/bin/ /opt/local/bin: bad interpreter: Permission denied
21:09~/Desktop/HI/NSN/Polls > sudo /opt/local/lib/python2.4/site-packages/django/bin/ startproject prufa1Password:
sudo: unable to execute /opt/local/lib/python2.4/site-packages/django/bin/ Permission denied
21:09~/Desktop/HI/NSN/Polls > sudo /opt/local/lib/python2.4/site-packages/django/bin/ startproject prufa1sudo: unable to execute /opt/local/lib/python2.4/site-packages/django/bin/ Permission denied
21:09~/Desktop/HI/NSN/Polls > python /opt/local/lib/python2.4/site-packages/django/bin/ startproject prufa1
21:09~/Desktop/HI/NSN/Polls > ls
mysite prufa1

Final edit: The problem is solved, see Ian C's answer for the right solution. Thank you everyone for helping my out, this was very fast!

share|improve this question
What happens (e.g. error message) when it "doesn't work"? Adding to path (or explicitly specifying the folder as in ./ and making it executable should suffice. – Daniel Beck Mar 1 '11 at 20:47
up vote 3 down vote accepted

There's a slightly more generic version of @Matt Jenkins hashbang (!#) tip you can use to make the script a little more portable. Make sure the first line in the file is:

#!/usr/bin/env python
...everything else...

That says "look for a program named python by searching my PATH and run the rest of this script with that program".

You'll also need to set the execute bit on the script with:

chmod +x

I mention this for completeness, noting that you've already done that.

Finally, the PATH variable doesn't actually contain . in it (the current working directory). That's a safety precaution and I don't recommend changing that setup (it keeps you from calling ./rm when you meant the shell's rm for example). So you need to call the script with:

 ./ startproject mysite

That says "look in the current working directory for" instead of "search the PATH variable" which is what happens if you omit the ./ part.

share|improve this answer
Thank you, this works now. – Haffi112 Mar 1 '11 at 21:24

The first line in the file should contain the program that runs the script prefixed by #! (known as hashbang)

For example:

...python code follows...

Then you can set the executable bit on the file and the shell will interpret it as a script using the program found in the first line as the interpreter.

This is often used with shell scripts, for example:


for FILE in `ls`
    echo "Filename: ${FILE}"
share|improve this answer
The head of the script already said #!/path/to/python so I don't understand why it doesn't work >_< (It had the correct path just to prevent misunderstanding) – Haffi112 Mar 1 '11 at 21:12
Is the path to python the right path to python? Check with whereis python – Majenko Mar 1 '11 at 21:13
Yes it's the right path. – Haffi112 Mar 1 '11 at 21:14
Well, now I'm flummoxed... – Majenko Mar 1 '11 at 21:21
Ah, I think I see what's going on here. The file you're trying to run isn't in a known place (i.e., not in your path) but in /opt/local/lib/python2.4/site-packages/django/bin/ You need to add /opt/local/lib/python2.4/site-packages/django/bin/ to your $PATH environment variable, then you can call it just by name. – Majenko Mar 1 '11 at 21:24
  1. Select the file in the Finder by clicking it once.

  2. From the File menu, select Get Info.

  3. In the Info window, click the triangle next to "Open with:" to expand that section of the window.

  4. From the pull-down menu that appears, select the application you wish to use to open the file.

Source: Indiana University - KB: How do I assign an application to open certain file types?

share|improve this answer
What application should I choose to open the file? I'm using python 2.4 with Django 1.2.4. I also don't see how this is relevant to running the command in terminal. – Haffi112 Mar 1 '11 at 20:56
@Haffi112: Python. As for command line, you need the shebang... – Tom Wijsman Mar 1 '11 at 20:58
Yeah I've tried that, it still doesn't work =/ – Haffi112 Mar 1 '11 at 21:12

When you change the file permissions, you have to write this:

sudo chmod +x

Works for me

share|improve this answer
The problem appears to be with the #! line, not with the permissions of the script file. – David Richerby Oct 8 '15 at 10:40

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.