Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I have two devices to establish my home network and internet connection:

  • A Sitecom DC-227 ADSL Modem + Router (Modem)
  • A Sitecom Router + Switch (Router)

Currently I've set it up using double routing and NAT. Between the modem and the router there is a network in the 10.0.0.0/8 range, and the real LAN behind the router is in the 192.168.2.0/24 range.

This works fine for regular internetting. However, I want to run some servers in the 192.x network, and I can't forward external ports correctly from the modem. I've set it up in its config panel, but it doesn't appear to work. This may be because it's a feature called "virtual servers", while the router has "real" port forwarding.

So I'd rather set up the modem to just bridge between ADSL/Ethernet, and have the router as the only router. How do I set this up? I tried setting the modem to "1483 Bridged" mode and set PPPoE on the router, but that didn't work. I don't know if I got all the details right though.

My current settings are: Modem:

  • Protocol: PPPoA
  • VPI/VCI: 8/48
  • Encapsulation: VC MUX
  • Username: kpn@direct-adsl
  • Password: kpn (it's the same for everyone)
  • Own IP: 10.0.0.1

Router:

  • WAN side: static IP 10.0.0.2
  • LAN side: IP 192.168.2.2, DHCP server for 192.x
share|improve this question

1 Answer 1

up vote 0 down vote accepted

The easiest thing to do is take your second device - the one you are now using as a router - and just use it as a switch.

Take the Ethernet from the modem and instead of plugging into the WAN port on the second device, plug it into a switch port. This eliminates the intermediary network and the modem will be the NAT router serving 192.x (or its default 10.x, doesn't matter). It looks like the DC-227 has decent standard features - firewall, QoS and, most importantly for your needs, DMZ and port forwarding.

share|improve this answer
    
I know that trick, but the port forwarding on the DC-227 doesn't work. It doesn't matter, we switched out both devices for a single Linksys modem+router. –  Bart van Heukelom Apr 21 '11 at 23:09
    
That's a fine solution. –  JCotton Apr 21 '11 at 23:53

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.