Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

Some days ago I installed Windows 7 on a Fujitsu Siemens Scaleo EVi 2565 Windows Mediacenter PC (fresh installation on a new partition). The Windows 7 setup failed at the end of the installation (after one or two reboots) indicating a non specified hardware problem. To be sure I repeated the setup procedure with the same result.

I suspected a TV tuner card driver problem, so I removed the TV tuner card from the motherboard. After rebooting I got this strange behavior: the PC stops with the BIOS screen shown below.

There are a 500 GB HD and a DVD-ROM drive attached. The SATA BIOS seems to somehow recognize the two devices (see "02 Devices"), but the error says

Port-00: No device detected
Port-01: No device detected

I can't enter the BIOS settings, hitting DEL or function keys as usual. I also tried to remove the battery, resetting the default BIOS configuration - without luck. I'm really stuck here.

Any ideas?

SATA error

share|improve this question
That typo ("This will take few seconds.") really bugs me. Every time I boot my machine... – sblair Aug 27 '09 at 19:30
up vote 2 down vote accepted

It should be caused by your faulty SATA HD. Try removing it and boot with a bootable CD to diagnose.

share|improve this answer
Wow, thanks. I was sure I did it, but appearently I didn't. :-) Now it boots from DVD. I guess that's a sign that I have to replace my 500 GB HD with a larger one. ;-) – splattne Aug 19 '09 at 14:35

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.