Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

My laptop is running Windows 7 Ultimate Service Pack 1. I'm using internet through Huawei 3G USB Modem E1550, due to signal issues, I do not connect the modem directly to my laptop, instead, I connect it via USB 2.0 extension cable, now the problem is that, when I attach USB flash drive to the remaining of the USB ports, I get notification bubble that says:

USB Device Not Recognized

One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message.

And this thing occurs with any port that I try, as long as the extension cable is connected and USB Modem is connected with that. While everything works fine if cable is removed. I tried the same by connecting the modem directly with my laptop ports without cable intermediated, and problem doesn't occur, So there's something to do with the cable. Though my extension cable is not very expensive, but the package says that it supports USB 2.0, and I also tested the data transfer rates of the cable, and it works fine.

I also looked up what device manager displays while flash drive is connected but not working, and all I see under "USB Serial Bus Controllers" category is "Unknown Device" with yellow exclamation mark which clearly suggests some issue with the device.

I cannot use Modem without extension cable since indoor network of my provider is very low.

What can I do to get my Flash drives working under such situation..........??

share|improve this question

3 Answers 3

up vote 1 down vote accepted

USB cables weren't designed to be run over long distances (over ~16 feet). The signal degrades over that span and it needs to be boosted.

You want something like: USB 2.0 Booster Extension Cable

Also, like @Hyppy said, you can also use a powered USB hub(separate power cord than the USB that comes from the computer) to provide more power in case the booster cable does not pass the power through to the terminal node on the USB chain.

share|improve this answer
    
Under the USB 2.0 spec, (non-active) extension cables are "prohibited". See page 92 of the main USB 2.0 specification in the zip file here : usb.org/developers/docs . It is likely that the combination of the the extension cable and the 3g card is messing up the attenuation or other electrical property of the cable. Using the abovementioned USB Booster extension instead, is basically the same as plugging in a 1 port hub with a long lead, which is okay and should, as he says, work much better. –  camster342 May 28 '11 at 13:17

You should check the device manager to ensure that all the driver software for your USB port was installed properly.

To do this,

  1. Right-click "My Computer"
  2. Click "Manage"
  3. Click "Device Manager"
  4. Expand "Universal Series Bus Controllers"

Anything that appears in yellow with an exclamatory symbol needs to be installed or reinstalled.

Download the drivers for those and re install.

share|improve this answer

If the cable is long, try putting a powered USB hub in the middle. It sounds like the long cable and the power requirements of the modem combined are taking too much power for your other devices to work.

share|improve this answer
    
The cable length is about 1.8 meters, and yes, my modem has LED representing the connection. But I wonder why this trouble occurs only with Windows, I'm dual booting with Ubuntu 10.10, and this problem do not exist in Ubuntu, though I get slow data transfer rates if I transfer files to flash drive while the modem is connected via cable, but at least I can access flash drives. –  Kush Mar 18 '11 at 17:57

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.