Super User is a question and answer site for computer enthusiasts and power users. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I have an Acer Aspire One D250 netbook, who originaly comes with Windows XP.

I will install Windows 7 on it, but before I like do create the Factory Recover Disk.

The netbook don't have CD drive and, the Acer program used to make the disks, called Acer eRecovery Management, only can create the its using a external CD/DVD Writer. The program message is Unable to detect a writable optical drive.

I dont't have an external CD drive and don't have Acer support in my country to ask for the disks. I think the best solution is make the Acer program write the disk on HD as a CD/DVD image so I can copy it to my desktop and burn it.

Someone has any idea on how I can create these Factory Recover disks?

share|improve this question

Foregoing the optical disk route, you might try getting an external hard drive that connects via USB. No need to get fancy - you can use a naked drive with a $20 adapter. Then, get a hard drive cloning program - I personally like Acronis True Image. This will allow you to clone your existing drive to the other drive, or store an image of the existing drive, that you can use the software to restore later.

As an aside: Are you sure the netbook has the required power to run Windows 7?

share|improve this answer
I'm rather fond of linux (I use the System Rescue CD, which can be setup to boot from a USB stick). I then use 'dd' to create a complete image of the working HD. – Michael Kohne Aug 20 '09 at 2:58
I realy would like to get only the restore disk, not a copy of the current HD. I don't know if the netbook will run well with Windows 7 and that is the principal reason to make the Recovery Disk :-) – Roberto Barros Aug 20 '09 at 3:28
My mother owns that netbook. I'll try to reproduce the recovery partition and let you know what I come up with. – CoffeeBean Aug 20 '09 at 4:02

If you had an external usb drive you could try creating a virtual CD on the usb drive and create the system restore disk that way then use another PC to copy it onto actual media.

share|improve this answer
That´s my idea too. But how I can make de usb drive looks like a writable optical drive? – Roberto Barros Aug 20 '09 at 16:34
I know that nero allows you to create a virtual writable drive I'm not sure what other software might allow you do it. So essentially you get a piece of software that pretends to be a CD drive but actually will create an iso file on the USB drive. – Col Aug 21 '09 at 10:29
I've had a hunt around and there also seems to be some freeware called totalmounter available that does what you need – Col Aug 21 '09 at 10:32

Took me a while to find a suitable tool, but I did find one in the end: Virtual CD. It's made by H+H Software GmbH.

Windows sees it as a BluRay-RW drive and you can configure the software to 'insert' a virtual blank disk (you get the choice of basically every type of disk, eg. CD-R/CD-RW/DVD+R/DVD-R/BluRay-R/etc.) the software then pumps out anything sent to it into an ISO.

The personal version comes with a 30-day free demo which seems fully functional and does the trick.

share|improve this answer

I had the same requirement so I could burn the Acer backup recovery disc's on a netbook that was failing in recognising nay external burners.

The program that worked like a charm was

I hope this helps other out as I took ages to find it.

share|improve this answer

Acer eRecovery doesn't work with mapped drives.

share|improve this answer

Try conecting your desktop/laptop DVD unit as a network DVD in the Acer Netbook (Map the drive). Then run the Acer Recovery Management utility again.

share|improve this answer

Your best bet is to try or

They seem to have thousands of disks on their websites, as far as I can see it should do a complete factory restore?

share|improve this answer

Use a DVD writer emulator.

Using Google, I found one that was free. It emulates a DVD burner and makes an ISO.

Plug in a USB key and copy the .isos (there are 2 ISOs), then make a bootable USB key (8GB) and put these ISOs on it.

Use a manual to integrate. I've found some to make a boot USB pendrive with ISOs booteable to recover.

share|improve this answer

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .