I am having problems getting an EoIP working in dd-wrt. Basically, I want to bridge my home and office networks. Both locations have static IPs. Can't really figure out what's going on here or if it is a bug with the software (since there are a few I've ran across that I've tried to fix).
Here is my setup. Both routers are running the std package.
Router 1: Release: 08/07/10 (SVN revision: 14896) Router 2: Release: 11/21/10 (SVN revision: 15778)
I have set up per this wiki page: http://www.dd-wrt.com/wiki/index.php/EoIP_Routing However I am having problems even being able to ping each other's internal EoIP address, let alone any static routes for traffic between clients behind the routers.
xx.xx is to preserve my networks security
Here is the output of both nvram grepping oet1_:
Router 1: oet1_rem=24.249.xx.xx (this is router 2's WAN IP) oet1_bridged=0 oet1_multicast=0 oet1_mtu=1500 oet1_netmask=255.255.255.0 oet1_en=1 rc_startup=nvram set oet1_ip=$(nvram get wan_ipaddr) oet1_pt=0 oet1_nat=1 size: 25609 bytes (7159 left) oet1_id=1 oet1_mssfix=0 oet1_ip=68.102.xx.xx (this is router 1's WAN IP) oet1_ipaddr=192.168.202.1 oet1_shaper=0 oet1_comp=0 oet1_fragment=0 Router 2: oet1_rem=68.102.xx.xx (this is router 1's WAN IP) oet1_bridged=0 oet1_netmask=255.255.255.0 size: 19571 bytes (45965 left) oet1_en=1 rc_startup=nvram set oet1_ip=$(nvram get wan_ipaddr) oet1_pt=0 oet1_id=1 oet1_mssfix=0 oet1_ip=24.249.xx.xx (this is router 2's WAN IP) oet1_ipaddr=192.168.202.2 oet1_shaper=0 oet1_comp=0 oet1_fragment=0
Btw, I had to manually enter the "nvram set oet1_ip=$(nvram get wan_ipaddr)" line into the startup script because I was getting 184.108.40.206 as my oet1_ip address.
I log in to each router and try to ping the other 192.168.202.1 or 192.168.202.2 addresses. The local IP works, but the remote IP address fails. This might be a newb mistake, but is there any authentication that needs to be done for this to work? I am struggling to get this set up. I have also set up static routes, but I feel at this point it is not relevant to show them because I can't even ping the remote gateway, let alone try to do any routing.