I have a 3 week old HP LaserJet CP2025 that was working fine. A few days ago I notice a light pattern is printing on ALL pages printed. The pattern is grey, on the left side of the page about half way or somewhat past. It is about 2 inches high by 1-1.5 inches wide - no difference in the pattern between pages, whether color or not.

It resembles what might happen with a bad fuser, or possibly some internal rollers/wheels are dirty.

We cleaned the rollers at the top and pulled the black cartridge and see nothing abnormal.

We ran the cleaning page function at least 8 times, no difference.

What do you think/what should we try?

link|improve this question

61% accept rate
feedback

2 Answers

I know toner is expensive, but as it has a long shelf life try replacing the toners one at a time. In my office when we see any pattern it nearly always corresponds to a leaking or dirty toner cartridge.

link|improve this answer
feedback
up vote 0 down vote accepted

It ended up being a small bit of paper stuck in the rollers! It was not easy to spot at first.

link|improve this answer
feedback

Your Answer

 
or
required, but never shown

Not the answer you're looking for? Browse other questions tagged or ask your own question.