Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I want to reset the "worst" case of the SMART's read error rate (currently at 100/max). The reason is simple: I don't want to be hassled by (1) the "press F1 to continue" for the error message at startup and (2) the random messages of Windows 7 to backup because of a hard disk problem.

The disk is working fine for me for most purposes. I have no problem with the data on the hard disk, and I plan to continue using the hard disk until it dies, anyway.

Of course, I have considered getting a new hard disk, but for the time being, I would be grateful if I wouldn't be pestered by the messages.

The hard disk is an old Hitachi Travelstar 80gb IDE for the laptop, in case it's needed.

(Side question: Will the disk still be usable if I reformat?)

share|improve this question
1  
The drive is failing, why use a failing drive? –  Moab Apr 4 '11 at 15:35
    
Since I currently have no other option. –  Nanashi-san Apr 5 '11 at 2:45
add comment

2 Answers

up vote 2 down vote accepted

If you don't want SMART messages on boot, your BIOS may support simply turning it off.

Otherwise, you should address this question to Hitachi Support, as I believe that they have a utility that can clear SMART. Do not use any utility not from Hitachi, as there is a great risk of bricking the disk.

share|improve this answer
    
I wasn't aware that such utility exists. Thanks for the info. –  Nanashi-san Apr 5 '11 at 2:42
add comment

SMART is an internal drive sector-reallocation table - when the drive detected a screwed up sector, it uses SMART to store the data on some other sector.

You never want to re-set the SMART data - that is asking to deliberately use all the known bad sectors on the drive again.

See post by cnd4

share|improve this answer
    
I see. I guess I should just live with it. Thanks. –  Nanashi-san Apr 5 '11 at 2:42
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.