Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

When I connect my laptop to an external display at home, it doesn't automatically extend the display, nor will it allow me to extend it. The Windows screen resolution dialog displays the error "Unable to save display settings" and the Intel driver dialog silently fails.

The laptop is a Dell XPS M1210 with an Intel GMA 950 adapter.

The same laptop works fine with my multi-monitor setup at work - 1 external display and 1 USB (DisplayLink) display. It also works fine when connected to my TV with the S-video output. It also used to work with my home display but has just stopped. I can't see anything that has changed on the laptop. The screen I can't connect to works just fine when plugged into a desktop.

This is the error:

screenshot of error

I tried editing the registry as suggested here. I didn't have a key at HKEY_CURRENT_USER\Software\Microsoft\MobilePC\TMM. I tried removing the whole MobilePC section and rebooting, which didn't make any difference.

EDIT: This is what it looks like at work:

work screenshot

Screen 1 is the laptop, Screen 2 is connected to the VGA-out and Screen 3 is on the DisplayLink USB connection. This setup works nicely.

share|improve this question
add comment

1 Answer

Have you tried changing the settings in the Intel GMA settings from control panel?

Update:

The display you have selected in the drop down(1. Mobile PC Display) appears to be the DisplayLink display that you use at work. Its odd that it shows up as active after it was unplugged. Have you tried the "Detect" and "Identify" buttons to see if it can figure out that the USB display is not hooked up anymore?

Per the DisplayLink user manual (pg 12 & 13), there is a off button to disable the DisplayLink monitor. This might free up the windows display settings. Try the Detect button again after having disabled the DisplayLink monitor.

As a last resort, you could try re-installing the DisplayLink drivers and the Graphics drivers.

share|improve this answer
    
Yes. It fails silently i.e. it appears to make the change, but nothing happens, and if you close the dialog and re-open it, it is back on the original setting. –  Colin Pickard Apr 27 '11 at 11:52
    
@Colin I added an update to my answer. –  James T Apr 28 '11 at 0:51
    
thank you. I'm not sure exactly how you tell which is which, but I will definitely try playing around with the DisplayLink software drivers. I've added a screenshot of the how it looks at work. –  Colin Pickard Apr 28 '11 at 16:47
    
@Colin I assumed that the name "Mobile PC Display" corresponded with the name that DisplayLink uses for their Displays since it shows up in the screen shot in their manual. My displays show up with different names. Also most laptops have a shortcut key combo in order to enable and disable secondary displays. It might be fn+F4 or fn+F5 or something. There should be an fn (function) key on your keyboard and corresponding pictures on your F keys. –  James T Apr 29 '11 at 0:09
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.