Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I burned a CD on XP using the built-in burning software and I can read the CD on that machine, but when I insert it into my Vista machine, I can't read the files. It shows the correct volume label, and the correct 'free space', but I can't access the actual files.

Am I missing something obvious?

(Both systems are fully up-to-date)

share|improve this question
    
What built-in burning software? Do you mean you burnt it on Vista and can't read it on an XP box? Is the disc finalized? –  JP Alioto Aug 22 '09 at 2:20
    
What do you mean by "Can't read the files", can you see that they are there? Can you not open them and if so what is the error you get or can you open them but something is not right with the opened files? –  Eran Aug 22 '09 at 2:29
    
How was it burned? File at a time or all at once? I've not heard of such a problem recently, but in the past I've seen it a few times. –  emgee Aug 22 '09 at 3:29
    
To clarify: There are no files showing up on the CD when I put it into a Vista machine. The XP machine sees the files just fine. Sorry if the question isn't clear, but the disk was created/burned in XP and can't be read on the Vista machine. I can't say it any clearer (that's basically exactly what I originally said) As for finalizing, that's what MarkM suggests below. To which I ask: how does one finalize a disk in XP? –  RickMeasham Aug 22 '09 at 10:35
add comment

3 Answers

up vote 5 down vote accepted

If you didn't finalize the disk then it is only readable in the drive that created it. This will make it look like it's an XP to Vista problem if these are the only two computers that you've tried it on.

share|improve this answer
1  
I believe it's readable on any machine with a burner and burning software but not on machines lacking this. –  Loren Pechtel Aug 22 '09 at 3:48
    
No, if it's not finalized it will only be readable by the same model of drive. –  MDMarra Aug 22 '09 at 4:06
    
That's what I'd begun to think from other posts around the interwebs. How do I finalize a disk using XP? –  RickMeasham Aug 22 '09 at 10:33
1  
The built in XP data-burning software has to way to finalize the disk, which is pretty dumb. Use a third party tool like the free cdburnerxp.se to make data CDs/DVDs. They offer this basic feature along with a ton of advanced ones. –  MDMarra Aug 22 '09 at 15:30
add comment

I don't suppose you accidentally wrote the files as hidden or system and the options are not set to view these on the Vista machine?

That is the only obvious quick thing I can think of :S

share|improve this answer
add comment

Try another drive - it's possible (although I would have thought rare these days) for a disc to be written outside the tolerance of a drive. I would expect this to be a drive/disc issue rather than an OS issue.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.