Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I've measured that my OCZ Vertex 2 SATA II SSD has a diagonal of 17 cm. The Google calculator says that 17 cm is 6.69 inch, not even near to 2.5 or 1.8 inch. The OCZ product page says that the drive is 2.5 inch.

Am I doing it the right way by measuring the diagonal? Or should I take the width? 7 cm is 2.76 inch, but 2.5 inch is 6.35 cm.

share|improve this question

3 Answers 3

up vote 4 down vote accepted

The dimension refers to the diameter of the platter within a drive. Obviously, there is no such thing within an SSD, but the size is quoted as the form factor of the casing of the SSD drive is made to match those of traditional drive so that they can be easily used in place of a traditional one.

The actual width of the casing of a 2.5" drive is 2.75". The depth varies.

share|improve this answer

AFAIK, the standard sizes are 2.5 and 3.5 inches, which means the width. The height is standardized and the 3rd dimension is unimportant. Look at a typical PC having a couple of 2.5 and 3.5 inch wide slots (there are also 5.25 wide slots intended for CD/DVD mechanics).

share|improve this answer
    
Height is NOT standardized - there are 7.5mm and 9mm SSDs, just like 2.5" laptop hard drives! –  Shinrai May 5 '11 at 22:06

No. You do not measure the diagonal. Measure the width of the connector side and that should match up.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.