Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I am thinking of purchasing the XFX HD-577A-ZNFC Radeon HD 5770. The card features a variety of ports:

  • 1 x HDMI
  • 1 x DisplayPort
  • 2 x DVI

Currently, I own two Dell UltraSharp 2407WFP 24-inch Widescreen Flat Panels which I connect to my machine via DisplayPort. Assuming I purchase the new card I would use HDMI and DisplayPort to drive the two monitors. I am not a videophile I just want to avoid distracting color, hue, and brightness differences.

Is there a disadvantage in doing this? Should I be looking for a card that does dual HDMI or dual DisplayPort? Am I even asking the right questions?

share|improve this question
    
good question, +1. –  studiohack May 11 '11 at 7:41

1 Answer 1

up vote 2 down vote accepted

While its possible that you could have some distortion based on the port you use, you are much more likely to see a difference based on the natural variances of the monitors (remember that you are using consumer grade panels that have much wider range of what is considered "acceptable" vs a professional display). If you care about your monitors truly being matched, you should pick up a calibration unit (Like the SpyderPro) that will measure your monitors and create profiles to match them to standards. Then not only will they match each other, but you can also be assured they are outputting the "true" image.

Otherwise, assuming you're using a standard setup, there's no dramatic advantage of DisplayPort to DVI (again, assuming a standard setup where you're driving a pair of 1920x1200 displays connected via 6ft cables). A lot of the advantages of DisplayPort relate to higher bandwidth applications that you don't need to worry about with a 24" display.

And finally, remember that HDMI and DVI are electrically identical and use the same encoding (only difference is that HDMI includes audio) so you can actually drive 3 displays using the same "type" of port using that card (assuming you used both DVIs and the HDMI).

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.