Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I have the pleasure ;-) to have been handed the task to try to get data off a server that had a RAID5 array problem and a failed attempt to recover it.

Background: the computer in question is some server from IBM with a 6-port SATA2 backplane. Four identical harddrives with 1 TB each are attached and configured as a RAID5 with 4 devices. In the past the server reportedly lost "contact" with one or more drives every once in a while and the RAID5 would go down. After rebooting the server the RAID5 would resync and all would be well. The guy maintaining this server believes that this is a hardware issue.

A few days ago the desaster happened. At first it supposedly looked the same as the previous times, with the RAID5 going down because of some drives being offline. But a reboot did not fix the problem, instead the RAID5 was "broken" (no information what this means). The maintainer tried to recreate the RAID5 using mdadm --create and he said it would show the RAID as "recovering" (not resyncing!). After 5-6 hours of work, this process was complete and the RAID5 was shown as being active again. However the filesystem was not mountable (no superblocks).

Using data recovery tools like testdisk we were able to recover files, however they seem to be corrupt (esp. noticable in raw WAV files).

That's the state I am taking over. I don't really know what went wrong, but my guess is that if it wasn't broken right after the reboot, the recovering caused data to be lost. Sequence of commands issued are not available either.

I believe there is nothing to recover, but wanted to check with the experts here before starting over from scratch (and introducing an actual backup strategy, cough).

share|improve this question

1 Answer 1

Hopefully you have backups, as I highly doubt that you will recover all (if any) of your data. If you have no backups, and the data recovery is life or death, you can contact a Disaster Recovery specialist that may be able to assist you in retreiving the data.

share|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.