Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I have a 3 year old PC with 4 internal SATA ports. My old SATA hard drives, all smaller than 2TB, work fine. If I buy a 3TB SATA hard drive, will it work in Linux? Will Linux with GRUB be able boot from such a hard drive without a BIOS upgrade? With a BIOS upgrade? It's fine for me to upgrade my Linux to the newest kernel.

FYI I'm already using a 3TB hard drive in an external enclosure, connected it via e-SATA to the computer with a SATA II controller. It works perfectly on Linux. Linux also recognizes the larger sector size (4 KB) automatically. I'm not booting from it though, and I haven't added any partitions: I've created one huge filesystem on it (directly on the device).

share|improve this question
The kernel isn't the problem. – Ignacio Vazquez-Abrams May 14 '11 at 12:17
up vote 3 down vote accepted

I don't see how a BIOS upgrade is relevant, though a BIOS update from the the mainboard vendor could be of relevance if it were to address a problem with the SATA controller. Chances are it doesn't and the only thing that will matter at this point is, does your motherboard have a SATA-II controller? That will determine if a drive larger than 2GB will be accessible. If not you can always buy a new SATA controller as opposed to a new motherboard.

share|improve this answer

Here are some hints that come to mind:

  • You need an OS and drivers for your hardware (controller) that know how to handle 64-bit sector numbers
  • Use the GUID Partition Table (GPT) (64-bit sector numbers).
  • The Linux boot loader grub2 can boot from GPTs (without UEFI bios)
  • I would put the boot and root partitions below the 2 TB mark.

Well, I'm not so sure if it is worth the trouble to try it with old hardware.

(Also, if the 3 TB hard drive uses the 4 kb sectors make sure to use the right partition alignment!)

share|improve this answer
Thank you for this useful information. I'm still interested in if I have to do a BIOS upgrade (which I want to avoid). Is a BIOS upgrade necessary for loading GRUB2 from the first 2 TB? – pts May 15 '11 at 10:16

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.