Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

What is the fastest way to force my iPhone to obtain a new IP-address?

One way to get a new IP-address is to simply restart the iPhone, but that is rather slow. Is there any faster way to obtain a new IP-address?

I'm running iPhone OS 3.0 and I'm getting my Internet connectivity over GPRS.

share|improve this question
add comment

4 Answers

up vote 4 down vote accepted

The quickest way I have found to reset all the network connections (wifi, 3g/edge/gprs) is to go to settings and turn on "Airplane Mode" for a few seconds and then turn it off again. It will reset all network connections.

Settings-->Airplane Mode

I have found this also to help when my phone doesn't connect to 3g in a known 3g area.

share|improve this answer
    
@knorv This is RENEWING IP only, not getting a new IP-address! –  deddebme Aug 26 '09 at 4:54
    
I didn't say it reset the IP, I just said it resets the connections. deddebme is correct in it being up to the carrier/server to give you a new ip. Sometimes you get a new one, sometimes you don't. –  Troggy Aug 26 '09 at 5:28
add comment

Turn wireless off and on again? It may not actually get a new IP as it may just renew the lease.

I don't have a ipod/iphone so I don't know if there is a renew IP button, but i would take a look around any network settings, especially the page on wifi where it says what your current status / connection is (going from memory on my brothers one)

share|improve this answer
    
getting a new NAT ip depends on the DHCP server, not the client, in this case the iPhone. –  deddebme Aug 24 '09 at 1:52
    
That's why I said it may just renew the lease and not get a new ip. –  William Hilsum Aug 24 '09 at 9:19
add comment

There is definitely a "Renew Lease" button.

Go to Settings, Wi-Fi, click the blue arrow next to a network and you'll see it. You can also tell it to "forget" the current network it's on.

share|improve this answer
    
But OP was using GPRS, not wifi. –  Jonik Aug 24 '09 at 4:37
add comment

Ok, go into the settings and change the wifi setting inside the chosen network from DHCP or whatever to Static. Copy all data except IP address. Take the first 3 sections of your assigned IP and copy them. Ex: IP is 143.23.0.198, copy over 143.23.0. then make up the last 3 didgets, making sure not to use 0,1, or 255. Those are specifically reserved for network tasks. then you should be good. it worked for me.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.