Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I would like to annotate a bitmap picture with numbers. The numbers should simply be in the middle of circles with a solid white fill and a black border: ➀, ➁, ... Probably the numbers are only from 1 to 9, and definitely below 20.

What I tried (I'm using the German version of Word, so please excuse incorrect translation):

  1. I created a new drawing area ("Zeichenbereich").

  2. I added the bitmap to the drawing area.

  3. I placed a flowchart node on top of the bitmap. Then I edited the text of that node and placed the number in the middle. Simple. But the result is not satisfying: The lower part of the number is clipped, although the circle is very large.

Is there a better solution?

If all else fails, naturally I will add the numbers to the image and export it at a high resolution. Only that will slow down the workflow.

share|improve this question

4 Answers 4

up vote 1 down vote accepted

First, instead of using a flowchart node, I am now using an ordinary circle (ellipse, drawn with shift). Seems that it is possible to add text to any shape. And, second, I found a way to adjust the position of the text within a shape:

  1. With the shape selected, go to "Text Area Tools" / Format (translated from German).

  2. Click the small icon next to "Font Size". A popup appears.

  3. Switch to the tab "Text Area", and there you can adjust the position of the text.

If there is an easier solution, I'd like to hear about it. In that case I will make your answer the accepted one.

share|improve this answer

If you simply added text to a circle, which it sounds like you did, edit the text again and reduce the font size.

share|improve this answer
    
As I wrote, the circles are already way bigger than the text. The numbers are clipped inside of the white area, not by the black border! –  feklee May 19 '11 at 15:06
    
Now found out about the reason for the clipping. See my solution. Adjusting the size of the borders gets rid of the clipping. –  feklee May 19 '11 at 15:24
    
@feklee You need to remove your solution from your question and post it as a separate answer. –  Joseph Hansen May 19 '11 at 16:18
1  
Naturally. However, I have to wait eight hours to do that. That's the rule, for "new users". –  feklee May 19 '11 at 23:05

Much simpler if you just want the number around the image (for 0-10):

  1. Add a caption to the picture (right click on picture and select 'Insert Caption')
  2. Tick 'Exclude label from caption' so the caption becomes a text box with a single digit in it
  3. Highlight the digit just placed in the text box and replace it (insert symbol) with a wingding of the number you want and set the font size appropriately.

1

If you want the number to be ON the picture, just insert a text box in the document, set its background and outline to No Color and insert the symbol inside the text box - you can then position it where you want:

enter image description here

share|improve this answer
    
Thanks. Before I posted the question I have in fact considered the second solution that you mention. However, as I wrote, the circle needs to have a white background with a black border. So this solution is not an option. At the moment I'm happy with the solution I posted! –  feklee May 19 '11 at 16:36
    
OK, use the other set of number/circle symbols in the WIngdings font set –  Linker3000 May 19 '11 at 19:19
    
That won't do it. The fonts have just one color that can be changed. What I need, however, are two colors: black and white (and naturally a transparent background for the area outside the circle). But, as I said before you posted your reply, I found a solution that works. Thanks anyway. –  feklee May 19 '11 at 23:11

Use MS Visio and grab a screen shot of whatever sketch you require to annotate. Then annotate using Visio.

Note the methods above do not allow you to move the numbers freely around in MS Word. The numbers will simply appear as they would in a regular sentence.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.