Super User is a question and answer site for computer enthusiasts and power users. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I have a wireless TP-Link TL-WR941ND router connected to the internet, but I can't get a good signal in the other end of my house. I have a spare Edimax BR-6226n wireless router.

Is it possible to use it to somehow increase the signal of my wifi network? If not, is it possible to do it with a computer attached (I got lots of old ones around)?

share|improve this question
Which exact models do you have? – slhck May 20 '11 at 12:32
TP-Link: TL-WR941ND – Amir Rachum May 20 '11 at 12:35
Edimax: BR-6226n – Amir Rachum May 20 '11 at 12:35
up vote 3 down vote accepted

On some models this is not possible because they don't have that feature. But luckily, your Edimax supports wireless bridging:

Supports AP, AP Client, Bridge, Bridge+ WDS and Universal Repeater mode

  1. Go into your settings by typing the Router's IP address
  2. In "Basic Settings", under "Mode", select "Universal Repeater" mode
  3. Under ESSID, enter an arbitrary name for your repeating router
  4. Under Root SSID, enter the SSID of your original router's network

See the manual for more details.

share|improve this answer
Ended up using its WISP function, but I guess this would work too. Thanks! – Amir Rachum May 20 '11 at 16:22
Almost every (if not definitely every) router has the ability to not assign DHCP on it's own and instead act as a repeater/hub by connecting it with a LAN input (not WAN) and getting it's own IP. The router that it connects to then issues the DHCP addresses and the network if unified. In terms of wireless synchronization, they do need to provide the same specs and not all routers are as capable. – Enigma Mar 5 '13 at 15:18

If it supports wireless bridging, then yes.

share|improve this answer

Go to and find a router that is supported. The DD-WRT firmware has support for Bridging. I like the Linksys WRT56GL router. It came with Linux firmware and is easy to flash with DD-WRT

share|improve this answer
Why would the OP need a new router if the one he has already supports bridging? – slhck May 20 '11 at 14:42

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .