Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I am not able to charge an Apple iPad over USB with a Windows machine. But both an iPhone and an iPod charge properly over USB on this machine.

share|improve this question

migrated from stackoverflow.com May 30 '11 at 13:31

This question came from our site for professional and enthusiast programmers.

add comment

4 Answers

up vote 5 down vote accepted

The iPad requires a higher power output than many USB ports can deliver. If you have this plugged into a non-powered hub, it may not work at all. If none of your ports can deliver a high enough power output, you'll have to use the wall charger that was supplied. You may find that some lower power ports will charge but very slowly.

share|improve this answer
add comment

The iPad needs more power to charge than the iPhone/iPod, and most USB ports are unable to provide sufficient current.

share|improve this answer
add comment

You have to plug it into the wall to charge. Your computer cannot provide enough power via USB.

share|improve this answer
add comment

The good folks at Apple have disregarded the USB standard, which dictates that devices should draw no more than 500mA of current when charging over USB. Even the iPhone and iPod draw slightly more than 500mA, though only about 30mA more. The iPad draws much more than 500mA, which is why it fails to charge over most USB connections. Apple, of course, has built support for higher charging current into it's chargers and computers, which is why the iPad charges just fine if you plug it into an Apple computer.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.