Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

Formatting an external 500GB HDD took almost >6 hours that I started like:

D:\>format /FS:fat32 F:
The type of the file system is EXFAT.
The new file system is FAT32.
Enter current volume label for drive F: musix

WARNING, ALL DATA ON NON-REMOVABLE DISK
DRIVE F: WILL BE LOST!
Proceed with Format (Y/N)? y
Formatting 476810M

finally responded with the error:

The volume is too big for FAT32.

However according to MSFT there are no such limitations. (I used XP specs, while I am formatting in Win7, ok?) I am not formatting the drive during setup but on an installed version from the command prompt.

I want to use this disk with the maximum available capacity as en external HardDrive connected to an MDI interdface in my car to play music.

What are the proper settings for that and can I use/format the (almost) full 500GB?

share|improve this question
    
How large are your clusters? If your clusters are 32kb, then you max out at 8TB. If your clusters are 4 kb, I would assume you max out at 1TB, etc –  soandos Jun 6 '11 at 6:43
    
I do not know ;) clustersize is not my cup of tea, I formatted using default settings, but should they be much larger? –  Caspar Kleijne Jun 6 '11 at 6:49
3  
Windows XP can mount and support FAT32 volumes larger than 32 GB (subject to the other limits), but you cannot create a FAT32 volume larger than 32 GB by using the Format tool during Setup. If you need to format a volume that is larger than 32 GB, use the NTFS file system to format it. –  soandos Jun 6 '11 at 6:50
    
Clusters cannot be bigger than 64kb in FAT32 –  soandos Jun 6 '11 at 6:51
3  
Any reason for reformatting away from exFAT? exFAT is a viable alternative to FAT32 on Vista and Win7 for large drives and goes beyond the limitations of FAT32, just be aware that Windows XP requires a download from Microsoft and Linux support may be patchy. –  Mokubai Jun 6 '11 at 7:39

4 Answers 4

up vote 7 down vote accepted

You cannot format a FAT32 volume greater than 32Gig from XP or Win7 but you can mount and use a bigger one.

However you must use an alternate tool to format the volume.

There are limitations as to bootable drives on your greater than 32gig Fat32 drive

Partition Tool

Also read this guys page for more technical info.

share|improve this answer
    
DON'T USE the partition tool in the link of this answer. It installs, shows advertisements, opens, but doesn't do provide the "free" service it promises, but tries to make you buy a full license in stead. –  nl-x Jun 17 at 15:33
    
At the time this question was answered it didn't do all the things that you say. But ultimately ,"all succumb to the might need for dollars". –  kingchris Jun 18 at 7:04
    
And generally i wouldnt mind. But come on... make me pay premium for just formatting a drive once? Messed up. Btw does linux do this without a hassle? –  nl-x Jun 18 at 7:10
    
I have never tried to format a FAT32 partition via Linux but it is suppose to be possible according to Google. But as always run your disk tools, copy a whole bunch of files across. verify their CRC or MD5 or byte by byte compare. Defrag drive then compare files again. Let the User Beware. –  kingchris Jun 18 at 7:28

Rufus can do this. Start it up, then

  1. choose File system Large FAT32
  2. uncheck Create a bootable disk
  3. uncheck Create extended label and icon files
  4. click Start

Source code is available at GitHub

share|improve this answer

What an annoying limitation! You can't format FAT32 volumes larger than 32GB from any version of Windows...

C:\Users\jeff>format e: /FS:fat32 /Q
Insert new disk for drive E:
and press ENTER when ready...
The type of the file system is EXFAT.
The new file system is FAT32.
QuickFormatting 58.9 GB
The volume is too big for FAT32.
Format failed.

... but they must exist because this Lexar USB 64GB drive right here is formatted FAT32! How?

It is possible to do it, you just have to use some other tool. I used this one, FAT32 Format.

enter image description here

share|improve this answer
    
For some reason I had trouble re-formatting a 64GB drive that was formatted to 32GB, I had to use DISKPART at the command line as indicated here: superuser.com/a/470663 –  Jeff Atwood Apr 13 '13 at 18:07

You can format your external hard drive in FAT32 using SwissKnife (freeware). It will let you bypass The volume is too big for FAT32 error.

share|improve this answer
3  
note that unfortunately download.com has become an adware magnet.. the install process has literally 5 different "declines" you must issue to not get adware with your download :( –  Jeff Atwood Dec 19 '12 at 21:09
    
Official site. –  Karan Dec 24 '12 at 22:11
    
@Jeff: Thanks for the feedback. Their official page only publishes the premium version. Those who want to download the free version may google for "swissknife free windows 7". That search brings download sites like tucows, softonic, etc. but I have no idea if they are adware magnets. –  Mehper C. Palavuzlar Dec 25 '12 at 6:09

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.