Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I need to replace my current motherboard with a new one, no other parts are changed.

Must I format my harddrive and reinstall windows, or can I use the old installation and let windows install the right drivers?

I realize, there might be a performance hit, but I'll probably need the new one just for a week and would like to replace it with the old motherboard again.

share|improve this question
    
What version of windows are we talking about here? –  KronoS Jun 10 '11 at 13:19

4 Answers 4

up vote 3 down vote accepted

Windows may boot with the new board out of the box, but it is possible that you will have to massage it go get it to work. If it does work, you should still update all your drivers from the motherboard's web site. If it doesn't the easiest way to do it is re-install and pick "upgrade": This will keep all your programs intact, but replace the hardware drivers and any other faulty registry settings. Even after the upgrade, update your drivers.

If you try to upgrade to your same OS, but are not given the option (grayed out), it is likely because your original disk is older than your current service pack level. In that case, you will need to slip-stream your original OS disk to add your service pack level or newer. You can search how to slip-stream here as it comes up often.

share|improve this answer

I've recently done a motherboard swap from an AM2+ motherboard to a new 1155 Sandybridge one and was able to boot into windows and use it properly. Although it won't give you 100% of the performance you want due to chipset drivers.

For one weeks use I reckon it would be OK to use the new mobo with the old install.

share|improve this answer

It depends on whether your currently installed Windows is able to load all the data from harddisk and recognize the chipset of the new mainboard. If Windows boots up properly, you can work without a new installation. Otherwise it crashes during your first startup. Then you’ll need a reinstall, of course.

As Sandeep Bansal said you would mostly have to install the chipset drivers to get maximum performance with the new board. Please think of uninstalling the old chipset drivers, either before or after the installation of the new board, but surely before installing the new ones. Could save a lot of time if the drivers don’t like to mix with each other (had such a case with graphics drivers).

share|improve this answer

It's dependent on a lot of factors here (mainly version of windows) and can be hit and miss no matter what. In my experience windows 7 will handle it as I took a hard drive from a laptop an placed it in an entirely different machine (intel dual core to an AMD dual core) and after a few restarts windows picked up all the drivers no prob.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.