Super User is a question and answer site for computer enthusiasts and power users. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

A couple of months ago I got a new 500GB HDD for my no-name-brand Laptop PC and I cloned the complete Win 7 Pro 32bit system with clonezilla from the old 70GB drive to the new one. At first everything was great, the new driver was immediately updated.

But since then I get on a more and more frequent level (used to be every 2-3 days, but now it's more like 2-3 times a day) a BSOD Stop error. From the eventlog in Windows I know that there are two different error codes sppoking aroung:

0x00000027 (0xbaad0073, 0x9954f80c, 0x9954f3f0, 0x8ecd7c82) RDR_FILE_SYSTEM

0x00000044 (0x85443230, 0x00000eae, 0x00000000, 0x00000000) MULTIPLE_IRP_COMPLETE_REQUESTS

I checked for viruses and did a complete HDD check using the Windows tool and WesternDigital tool (which is the producer of the new HDD) without results. I also looked for driver updates but couldn't find any.

The name of the HDD as shown in the device manager is:

WDC WD5000BPVT-00HXZT1 ATA Device.

I'm really a noob regarding those kind of problems, so if you have any idea what I can try without losing all my data, let me know. Also, if any additional information are required.

share|improve this question
Have you run a CHKDSK lately? – evan.bovie Jun 16 '11 at 12:27
Some potential clues (MULTIPLE_IRP: vista usb goes idle):, (RDR : windows 7 offline encrypted files) NOTE THAT STOP errors usually reference a module. This module is important. – horatio Jun 16 '11 at 14:10
CHKDSK doesn't show any errors. Where do I find the module reference? – Daniel Jun 19 '11 at 20:26
did you sysprep this system before you tried to clone it? – MDT Guy May 13 '13 at 14:25

this issue is mostly caused by malfunctioning drivers, typically ide/sata-controller or
networking-drivers. do you use standard windows drivers?

share|improve this answer
yes standard windows drivers. The IDE/ATA/ATAPI controllers are Intel(R) ICH8M Ultra ATA-Controller - 2850 and Standard AHCI 1.0 Serial-ATA-Controller. Should I install the drivers of the manufacturer? – Daniel Jun 19 '11 at 20:30

Might be a problem with the "NEW" hard drive, I would run a quick S.M.A.R.T check on it:

The utility is also on a linux distro called Parted Magic:

While S.M.A.R.T attributes are not definitive, i.e. a drive can pass S.M.A.R.T tests and still be bad, it can usually point you in the right direction.

A failing drive will turn the program's tab red, look for reallocated sectors and ATA errors.

share|improve this answer

I've had this issue when imaging machines with different hard drive sizes using Clonezilla. The tool I use to diagnose this issue is called "BlueScreenView". This is a pretty handle tool when it comes to troubleshooting the infamous Blue Screen. It gives you indepth information about the error codes. It would be put to better use if trying to troubleshoot the issues you are having, and then potentially lead you to a solution specific to your issues.

You can download it here:

share|improve this answer

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .