Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

My parents have a Dell Dimension 4300 Desktop with a Maxtor 2B020H1 drive in it. I am pretty ignorant about HDDs and want to ensure that I get the correct one to add as a second drive.

I understand that this is an IDE drive, can I just buy any current PATA drive, or do I have to be careful and buy a specific type.

I'm probably only looking for a 60-80GB drive, and probably from seagate.

Anyone point me in the direction of a suitable drive?

share|improve this question
    
Have you checked the Dell site to see if there's a guide on there? –  ChrisF Aug 26 '09 at 11:33
    
Tip: IDE/PATA drives (seem to) max out currently at 500GB, but make sure your BIOS/motherboard supports drives that large before you fork out for one. The Dimension 4300 might be too old to support very large size drives, but I can't say for sure. –  Chris W. Rea Aug 26 '09 at 12:54

3 Answers 3

up vote 4 down vote accepted

According to Dell's information , this machine will hold 2 drives.

two bays for 1-inch–high IDE hard drives ATA-66 or ATA-100 Ultra DMA hard drive, CD drive, Zip drive, DVD drive, and CD-RW drive

Basically, that means any standard 3.5" PATA drive should work.

As others have said, a larger drive will be faster, likely less expensive, and you never know when you'll need more space.

Personally, depending on budget and usage patterns, I would consider upgrading the machine to a new $400-500 machine from Dell. Get a new machine with a new hard drive, new monitor etc. This machine must be around 4 years old, so the hard drive is on borrowed time.

share|improve this answer

I can't comment on the make/model of drive you need; but as for size, get the largest you (or your parents) can afford even if it seems you'll never fill it.

You might find that a larger (but not the largest) drive is actually cheaper than the 60-80 GB you've specified. Why? Because the smaller drives are rarer and hence more expensive; a larger drive might have been top of the range 6 months ago, but now has been superceeded so the shop (or website) has stock to get rid of so they're discounting the price.

share|improve this answer
    
Larger drives tend to perform better than smaller drives, too, due to increased aereal density. –  Chris W. Rea Aug 26 '09 at 11:39
    
@cwrea - good point. I was only addressing the cost and ease of purchase. –  ChrisF Aug 26 '09 at 11:43
1  
Plus, when I buy a new larger drive, I typically image my old onto the new and make it the system drive since newer ones perform better. The old is relegated to storage-only. Of course, this is extra effort ... but if moving from a 60-80GB 5400RPM drive with 2MB cache to 500GB 7200RPM with 16MB cache, it's worth it since you can feel the "fast" :-) –  Chris W. Rea Aug 26 '09 at 12:51

Any IDE drive should fit your PC so long as it is 3.5" make sure you don't get a 2.5" drive since these are intended for laptops and would need an adapter to fit. According to the spec on the Dell web site your pc has 2 internal 3.5" slots available so fitting the drive shouldn't be a problem.

If you are going to connect it to the same cable as the existing drive make sure the jumper is set to slave or cable select.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.