Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I have just bought a new Samsung RV511 Laptop (the i5 Version).

Anyway it comes installed with a Broadcom Wifi Card, I have a Super Atheros Mini Wifi Card that I would like to swap for the Broadcom one. I use Atheros for security auditing purposes in Linux that the Broadcom one is not good for.

Trouble is I have never got to the barebones of a laptop, although I am a Custom PC Builder, laptops i generally have no concern for.

Take a look at this picture, I took one back panel off to reveal some of the components:

enter image description here

I believe the Wireless Card is where I marked the arrow pointing too. That little white square thing appears to be a sticker of the Wifi card, it says WLAN.

How can I access it to swap it with my Atheros one. Do I need to remove all the outermost screws? There are screws located to the right of where I scribbled in Yellow and next to the HDD, do I just remove those?

I dont want to destroy the machine, only just got it today.

Appreciate some help thanks.

share|improve this question
3  
Why would anyone in their right mind do this? "Because you don't like Broadcom"? Really? –  Wuffers Jun 21 '11 at 14:55
1  
.. also, you'll void your warranty on day 1 –  Sathya Jun 21 '11 at 14:56
1  
I found a picture of the manufacturer wireless card here. I am doing more research to help you though. I thought the picture would help a bit. –  David Jun 21 '11 at 14:57
    
i just give you a vote up by mistake. why do you not approve? If i decide I dont want it, and instead want to put another Wifi card that cost a lot more than this Broadcom one I will do that. –  user85527 Jun 21 '11 at 14:58
2  
So the guy doesn't like broadcom, who cares. His question is valid. –  MaxMackie Jun 21 '11 at 15:25

3 Answers 3

up vote 0 down vote accepted

You'll probably need to remove more screws. Most wireless cards use an internal connector that looks a lot like a memory slot. You'll need to keep removing screws (carefully) until you get to the device that should look nearly exactly like your Atheros card.

share|improve this answer

Just FYI, the card looks like one of these two examples. Mini-PCI and Mini-PCI Express cards

share|improve this answer

Be careful when removing parts from the back like that. I've taken apart my laptop a couple times and a method I use to organize my pieces is as follows:

Make sure you have a large space (like a table) around Every time you take off a piece (carefully), put the piece furthest from you and put the screws in the holes in the plastic/metal piece. Keep doing this in sequential order When you reach your wireless card, remove it and put your new one it. Pray to Science that it isn't attached using specific flex cable. Once its switched, put the pieces back in, starting from the piece closest to you.

This may seem easy and babyish but you miss one small black piece and you're TOAST. Make sure you put them back in the same order you took them off.

Good luck with this, happy hacking!

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.