Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

Recently I discovered that my system clock was slowing down. I got a new CMOS battery and replaced the one already on the motherboard. Both of the batteries seemed to have good voltage with a tongue test. However, two days after I re-synchronized the clock over the internet, I have lost 9 minutes and 15 seconds.

Does anyone know what could be causing the problem? I read in another question that the Real Time Clock crystal might be at fault, does that seem to be the case here?

Custom built machine with a Gigabyte GA-770TA-UD3 motherboard and a AMD Phenom 955 BE @3.2GHz running Windows 7.

share|improve this question
    
BIOS clocks are notoriously poor. That's even worse than average though... –  Billy ONeal Jul 3 '11 at 4:35
    
vancouver-webpages.com/time –  Aki Jul 3 '11 at 6:01

2 Answers 2

up vote 3 down vote accepted

I use an HP/Apollo system for work which is designed so that the clock runs slowly, but a modern PC motherboard shouldn't do this.

You could use an NTP server to synchronise the clock to a time standard, but it should be able to keep better time (than you're seeing) without it.

I would agree with the theory which says it's the RTC crystal. What you're seeing may be an indication it's about to fail completely.

share|improve this answer

If it really is not the battery, I would have to believe you have a motherboard problem. Check out this link for more on board time problems:

http://www.pcguide.com/ts/x/comp/mbsys/cmos_LosingTime.htm

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.