Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I've been running a home network based around a Linksys router for years. We had a couple of PCs and a QNAP NAS wired to the hub and then numerous wifi-connected clients.

We've recently swapped the Linksys for a BT Home Hub. Now, client machines can only connect to the NAS via wifi; wired connections do not work. This is true for all machines and I have test wired and wireless on all those capable.

Any help / suggestions much appreciated.

share|improve this question
add comment

1 Answer

OK, as per usual, I figure out the answer within minutes of asking the question!

The problem was that the new router will issue IP addresses below 192.168.1.100 to wired clients. The NAS was configured to only allow a range starting at 100.

Changed the security setting on the NAS, problem solved!

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.