I want a way to evaluate and get a score of how well a power supply is functioning, without removing the power supply from the computer.
Where I work, we still have a bunch of 6-8 year old Windows desktops in production that we're about to (finally!) refresh. Most of them have had an upgrade at some point, but the typical machine is still an old P4 with 1GB RAM. By far, the single most common point of failure on these machines are the power supply (hard drives are #2).
Because of budget constraints, we're replacing the old machines with off-lease 3 year old machines. The new specs are Core 2 Duo 2.33Ghz with 2GB RAM for about $200. The replacement machine was a high-end desktop when it was new, and so the build quality is very good. That's a huge step up for not a lot of money. My one concern is that these are small form factor units, with non-standard form factors for the power supplies.
I have two purposes in mind for the rating the power supplies.
First, as the old machines begin to go out of service I want to harvest the old power supplies for use in others that haven't been replaced yet. The machines are slated to be replaced soon anyway. It makes no sense at this point to spend any money replacing a dead power supply with a brand new one for a machine we won't keep long. To be effective at this, I need to know that the replacement part isn't nearly as far gone as it's predecessor. I want to work on a "best available" replacement policy, but to do that I need to know which of my inventory are the best units.
Secondly, since the new machines are already a few years old and given our recent concerns with this specific part, I want to have a better idea of the status of each power supply I'm putting out for the new machines. Even if I need to replace the power supplies of all my new machines within the first year, I still feel like I'm getting a good deal. It's just that in that case if I can test up front and know that this will happen I can save a lot of effort and frustration by doing it up front. On the other hand, if they're in reasonable shape budgets are already tight and so I'd like to avoid the expense. Hence I want to be able to easily and quickly get a score for the power supply on each new machine when it arrives.
I want an easy way to pin the health of a power supply down to a simple score. I should be able to do this without removing the power supply from the machine. A windows software program would be my ideal option, but a linux tool that comes with a live cd or an inexpensive hardware device like a kill-a-watt that reads draw is a possibility also.