Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I'd like to extend my WiFi coverage, so I've bought the TP-Link TL-WR1043ND and updated its firmware to the latest (wr1043nv1_en_3_13_4_up(110429)) but I can't find how to use its WDS function.

Reading further on Super User I understand that both the modem-router (Pirelli Alice Gate) and the TL-WR1043ND should support WDS. Are there any tricks to achieve the same result - extending my WiFi range - even changing the firmware to DD-WRT or Tomato etc?

share|improve this question
    
You need to have the modem/router set to WDS mode and the TP-Link set to Wireless Bridge. –  ChrisF Jul 23 '11 at 19:24

1 Answer 1

up vote 1 down vote accepted

More often than not, WDS requires two or more APs from the same manufacturer in order to work properly. This actually means both need to have firmware developed by the same vendor. So, you most likely have to flash DD-WRT (or any other 3rd-party firmware) to the Pirelli Alice Gate modem-router and TL-WR1043ND.

I know DD-WRT is compatible with TP-Link TL-WR1043ND, but I'm not sure about the other device. OpenWRT seems to be compatible with both (link 1 & 2), but you'll need a serial cable to flash the firmware to the Pirelli Alice Gate.

share|improve this answer
    
I had a USRobotics modem/router sending to a TP-Link WR743ND when both had their native firmware (albeit the latest versions of each) without any issues. –  ChrisF Jul 23 '11 at 19:47
1  
But you can't always be so lucky. That's why I said "more often than not". Some vendors even state which AP-AP combination that is guaranteed to work hassle-free for WDS. –  Larssend Jul 23 '11 at 20:42
    
Agreed, but I wanted to point out that it might just work "out of the box". –  ChrisF Jul 23 '11 at 20:44
    
That's the saddest pain ever :( Maybe I should sell my Pirelli Alice Gate and get a tp-link modem - router that works perfectly and out of the box with my tl-wr1043nd... :( –  Pitto Jul 24 '11 at 13:48
    
Maybe adding a TD-W8961ND will do the job, right? –  Pitto Jul 25 '11 at 8:24

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.