Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I've just bought the Logitech anywhere mouse and I was wondering if I use the mouse on wet surface area will it spoil the mouse?

share|improve this question

6 Answers 6

up vote 14 down vote accepted

The "anywhere" refers to the laser/sensor type used to track the mouse movement. Traditional red laser mice do not work very well on semitransparent, transparent, or excessively shiney surfaces (a glass desk, a piece of clear plastic on top of your desk, or a highly polished wood desk), as well as on non-flat surfaces (your leg), heavily textured surfaces (your couch). Their optimal working area is a dull, slighly textured surface, such as an unpolished wood desk, a painted desk, or a mousepad. By using more sensitive camera sensors and light sources that work differently than normal visible light, an anywhere mouse (and most high-end mice today) can work just as well on any of these surfaces.

The assumption is simply that the surface is stable (ie, not liquid) and has the physical properties of a solid collection of matter (anti-matter and dark-matter are generally regarded as being singularly imperfect mousing surfaces). Even then, transparent surfaces that have a light source under or behind them will still probably stymie even this anywhere mouse, especially if the light source emits non-visible light similar in wavelength to that used by the anywhere mouse.

share|improve this answer
1  
If you get your hands on an anti-matter or dark-matter surface to try this, please let me know how it goes! –  William Jackson Aug 2 '11 at 20:22
1  
I have a young son who, based on how solid matter interacts with him, I believe to be at least partially composed of anti-matter. I can't mouse on him either. –  music2myear Aug 2 '11 at 20:28
1  
+1 for describing the optimal surface. I've just put my unpolished wood drawing table beneath the mouse and it immediately started to work on slow little precise movements that previously seemed impossible. –  naxa Sep 26 '13 at 21:01

By anywhere they mean solid surfaces. In their web page, they say:

...tracks on surfaces like clear glass* and lacquered desks that stump optical mice and standard laser mice.

*At least 4 mm thick.

share|improve this answer

I would not expect it to work though a film of water, as it would change the reflection patterns.

Also, while the mouse might be waterproofed on the bottom (don't know, can't seem to find it anywhere) I don't think it would move smoothly on water anyway. Seems like its not worth it to try.

share|improve this answer
    
erm ya on water it will sink of course lol –  Pacerier Aug 2 '11 at 17:51
    
A film is very thin... I guess it could sink in <1/10mm though... –  soandos Aug 2 '11 at 17:52
    
sry i don't understand that comment –  Pacerier Aug 2 '11 at 17:53
    
Its a really really small amount of water, its not possible to sink. a film is really thin, so it would be like drowning in 1 mm of water. –  soandos Aug 2 '11 at 17:55
    
oic i get what you are saying now –  Pacerier Aug 2 '11 at 20:38

If you had a normal base, like a desk, and it got water on it, I do not think that a small film of water is going to affect you. I base this on having used optical mice on desks with glass tops, which were much thicker, and still worked well.

That said, I would not recommend it since you are talking about water and an electrical device. When I say that, I am not worried about electrical shock from +5V DC, but simply that you risk ruining it unless you can somehow really waterproof it. I would also worry more that your "waterproofing efforts" would cause more problems optically with the mouse than the water itself.

share|improve this answer

As long as any of the electronics in the mouse are not exposed to water, there should be no damage to the mouse itself. The plastic casing should protect the mouse from a modest amount of water, but submerging it underwater is likely to destroy the mouse. That being said, it is still unwise to use any electronic devices in areas where they are likely to come into contact with water.

Whether or not it actually works (i.e. tracks the wet surface), however, is a matter of the construction of the mouse itself, specifically due to the implementation of optical sensor technology it uses.

share|improve this answer

Well, I know you can with a Dell mouse, because I just spilled a cup of tea on my desk and the mouse is still working fine!

share|improve this answer
    
uh.. i don't think it will be fine 3 days ltr –  Pacerier Aug 2 '11 at 20:39
    
Considering the definition of "fine" many users I've met seem to operate under, I'll take this answer under extreme advisement only. –  music2myear Aug 2 '11 at 22:03

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.