Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I recently got a Mac mini as both a media centre and a desktop computer. I'd like control it remotely, over wifi, using my MacBook.

I have the impression that what's basically needed is to enable Screen Sharing (in System Preferences -> Sharing) on the Mini, and a VNC client program on the laptop. If that is correct, which (preferably free) VNC client is best suited for this job? Anything else I should know?


Update: While the OS X built-in VNC client is the quickest solution, JollysFastVNC and Chicken of the VNC seem strong options too. CotVNC clearly has the best keyboard "immersion", while JollysFastVNC seemed smoother in some other ways and is more actively developed.

For a future reader looking for a Mac VNC client, I suggest you try out the 3 top options below and pick the one that suits you!

share|improve this question

5 Answers 5

up vote 12 down vote accepted

Macs come with a VNC client; it’s in /System/Library/CoreServices/Screen Sharing.

Or use Finder’s Go > Connect to Server… in the menu bar (or press ⌘K) and enter vnc:// and the address of the remote Mac mini.

share|improve this answer
    
Cool, I didn't know that! It works nicely, although I'm wondering how to change the virtual desktop... and in general how to direct keyboard shortcuts to the remote machine? –  Jonik Aug 29 '09 at 14:52
1  
i use Screen Sharning all the time for the same reason. Also, in Finder, in the SHARED dropdown on the left panel, find your mini there and you can click on 'Share Screen.' –  akf Aug 29 '09 at 14:53
    
I usually use "akf" approach with other macs in my house. On my media centre mini I usually change the backdrop image so I know where I am at. The podcast maccast.com/2009/04/13/maccast-20090413 has a good discussion on using your mini as a media center. –  DanM Aug 29 '09 at 16:33

Chicken of the VNC is what I use.

share|improve this answer
    
I also like this one. All keyboard combinations (Cmd+Tab etc) worked with this, and that auto-scrolling is perhaps even better than JollysFastVNC's smart zoom. (More evaluation needed before I can decide which client I'll go with...) –  Jonik Aug 29 '09 at 19:22
    
There's one annoying thing for a new user though: it's hard to figure out how to exit Full-screen mode. It's Ctrl+Option+Cmd+`, but on my Finnish keyboard that doesn't work, and it's apparently impossible — had to go to the VNC server icon and disconnect the client altogether. Tons of people have been caught with the same problem: perendinate.com/2007/04/07/… I changed the shortcut to be the same as JollysFastVNC default, Ctrl+Cmd+Esc. –  Jonik Aug 29 '09 at 19:25
1  
Just to mention, there's been no new release of COTVNC since Jan 2006, so if active development is of interest this may be an issue... –  The Tentacle Aug 30 '09 at 14:52
    
I like Chicken, but I agree with Jonik... that key combination for exiting full screen is kind of insane. It's a character that looks exactly like a regular apostrophe most of the time when displayed, so it took about 15 minutes of googling around on my phone with my laptop disabled before I finally figured out they meant the back tick... –  Nathan Beach May 19 at 14:49

Tao of Mac has a VNC posting.
There is also JollysFastVNC.
And, wikiHow: How to Setup VNC on Mac OS X

share|improve this answer
    
Thanks. Do you have any experiences of the different clients? Can you recommend JollysFastVNC? –  Jonik Aug 29 '09 at 14:47
    
@jonik, no first hand experience -- which is why I left out the recommendations. –  nik Aug 29 '09 at 15:12

JollysFastVNC is by far my prefered client. It is fast, has a built in SSH tunnel mapper, cool screen zoom if your client screen is much smaller than server machine) lots of options for more complete keyboard immersion, which hopefully should solve your screen sharing problems...

alt text

share|improve this answer
    
Thanks! Compared to the built-in VNC client, I especially like the full-screen mode and the "smart zoom" feature you mentioned — useful as my Mini is connected to a 1600x1200 display while the MacBook only does 1280x800. –  Jonik Aug 29 '09 at 15:58
    
+1 for JollysFastVNC –  Chealion Aug 29 '09 at 16:46
    
+1 for Jolly's Fast VNC. It rocks. –  Dominic Cooney Oct 6 '09 at 5:43

You could try LogMeIn. You can use it from any computer and you only have to install software on the computer you control. It's also free, which is always nice.

share|improve this answer
    
For the record, Mac specific info here: secure.logmein.com/products/free/mac. Thanks — right now I just want a VNC client for controlling the Mini while at home, so I'm not too eager with their required registration etc. But I might check it out later, if I ever want to access my computers from anywhere in the world. –  Jonik Aug 30 '09 at 10:04
    
OK, sorry I couldn't be of more help. –  alex Aug 30 '09 at 12:22

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.