up vote 2 down vote favorite
share [g+] share [fb]

So I bought a printer yesterday and go to install it today and now I am at the "get the PC to talk wirelessly to the printer" step and can't seem to get through it.

Drivers downloaded from here but I am getting error code 101-903.

enter image description here

I am running Windows XP x64 which is likely the issue. Does anyone know if theres any tricky way to get around this and be able to print/scan without changing my OS.

link|improve this question
67% accept rate
Can you print wired? Or is any connection a problem? – soandos Aug 18 '11 at 19:22
@soandos - didn't get a USB cable but don't think it's a wireless issue, was able to put in wifi info on printer without issue and seems to be connected – Andrew G. Johnson Aug 18 '11 at 19:30
No, I mean do you have any x64 drivers for this printer that work, and its just the wireless part that fails, or do you have nothing? – soandos Aug 18 '11 at 19:31
Did you get a driver disk with the printer? – Windos Aug 18 '11 at 19:44
@soandos - oh, no as soon as I open the driver installer exe I get that error, just there's a few steps like setting up the network details on the printer itself that worked fine – Andrew G. Johnson Aug 18 '11 at 23:01
show 1 more comment
feedback

1 Answer

up vote 0 down vote

You wouldn't be able to get around that in anyway, and if you did it probably wont work.However, I did have a look for a driver and found this driver that you could download of the Kodak website. I'm not sure if it will work but its worth a shot.

link|improve this answer
feedback

Your Answer

 
or
required, but never shown
discard

Not the answer you're looking for? Browse other questions tagged or ask your own question.