Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

Scenario: All of a sudden, my computer feels sluggish. Mouse moves but windows take ages to open, etc. uptime says the load is 7.69 and raising.

What is the fastest way to find out which process(es) are the cause of the load?

Now, "top" and similar tools isn't the answer because they either show CPU or memory usage but not both at the same time. What I need is the single command which I might be able to type as it happens - something that will figure out any of

System is trying to swap 8GB of RAM to disk because process X ...


process X seeks all over the disk


process X uses 400% CPU"

So what I'm looking for is iostat, htop/atop and similar tools run into one with an output like this:

 1235 cp - Disk trashing
   87 chrome - Uses 2 GB of RAM
  137 nfs_bench - Uses 95% of the network bandwidth

I don't want a tool that gives me some numbers which I can analyze but a tool that tells me exactly which process causes the current load. Assume that the user in front of the keyboard barely knows how to write "process", but the user is quickly overwhelmed when it comes to "resident size", "virtual memory" or "process life cycle".

My argument goes like this: A user notices a problem. There can be thousands of reasons ... well, almost :-) The user wants to know the source of the problem.

The current solutions give me lots of numbers, and I need to know what these numbers mean. What I'm looking for is a meta tool. 99% of the data is irrelevant to the problem. So what the tool should do is look for processes which hog some resource and list only those along with "this process needs a lot of CPU, this produces many IRQs, this process allocates a lot of RAM (and it's still growing)".

This will be a relatively short list. It will be much more simple for someone new to this to locate the culprit from this list than from the output of, say, htop which gives me about 5000 numbers but requires me to fold multi-threaded processes myself (I have 50 lines which say VIRT 2750M but only 16 GB of RAM - the machine ought to swap itself to death but of course, this is a misinterpretation of the data that can happen quickly).

share|improve this question
I don't see why. The symptoms that you describe are not those of a disk trash (would not affect the mouse). Sluggish mouse is classic CPU at full capacity. –  soandos Aug 22 '11 at 8:01
This is just an example. Please take it with a grain of salt. Imagine a noob is sitting in front of the computer who knows nothing. How can he find out most easily what is going on (i.e. without spending half an hour googling what the output of top means) –  Aaron Digulla Aug 22 '11 at 8:03
Are you looking for a linux equivalent of task manager with a gui and everything, or something else? –  soandos Aug 22 '11 at 8:05
I look for something that I run and which says "Process X is hogging the machine". –  Aaron Digulla Aug 22 '11 at 11:45
add comment

5 Answers

up vote 2 down vote accepted

I do have to smile at the responses because each told you to run tool X. The only problem is if what you're seeing is intermittent there will be no way to correlate anything. A tool like sar can help if you run it at a high enough frequency, but I'd claim collectl is even better.

Like sar, you run it as a daemon by installing the RPM and doing /etc/init.d/collectl start.

Now when you see something sluggish, collectl -p /var/log/collectl/filename --top will play back the data and show you the top processes. You could have also just run collectl --top and see them in real time. BTW - anything you can do in real time you can playback as well.

As for CPU load, what if you ARE getting overloaded with interrupts? collectl -sC will not only show the loads on individual CPUs (or use -sc for average load), it will show how they're spending their time. Include -j (-scj) and you'll see the number of interrupts/CPU. Use uppercase -J and you'll see the TYPES of each interrupt/CPU.

Of course, if you really like vmstat, you can always playback collectl data with --vmstat and it will show historical data in vmstat format.

There are far more switches than I have time to list, but you can check it out at SourceForge or just google it.

share|improve this answer
Thanks; this isn't exactly what I was looking for but at least it's a good starting point. –  Aaron Digulla Aug 24 '11 at 18:37
Fantastic tool! And on Ubuntu (at least since 12.04) you just have to install the package - it starts the daemon automatically on install and on reboots thereafter :) –  nealmcb Oct 1 '13 at 19:52
add comment

"top" works reasonably well, as long as you look at the right numbers. Let's see:

top - 13:11:45 up 13 days,  1:13, 21 users,  load average: 0.06, 0.11, 0.26
Tasks: 271 total,   2 running, 267 sleeping,   0 stopped,   2 zombie
Cpu(s): 19.0%us,  6.3%sy,  0.0%ni, 74.0%id,  0.5%wa,  0.0%hi,  0.2%si,  0.0%st
Mem:   8183668k total,  8002712k used,   180956k free,    12476k buffers
Swap: 11847900k total,   723480k used, 11124420k free,   767016k cached

Now, if the system is slow because CPU is all taken, it shows as "us" and "sy" columns on "Cpu(s):" row being close to 100% together.

If it's slow due to swapping, "Mem:" "free" shows very low values and "Swap:" "used" high values.

If it's slow due to I/O in general, then "Cpu(s):" "wa" tells that time is spent on I/O wait.

Now, if you know I/O waits are the problem, you can use programs "iotop" to know which processes create most I/O.

share|improve this answer
+1 But I'm more looking for a tool which does this analysis for me and prints the process along with some info what's wrong. I don't want to gather that from the "raw" figures. Anything? –  Aaron Digulla Aug 22 '11 at 11:48
I'm sorry, but you can't solve problems like machine slowness without understanding on basic level the difference between different kinds of slowness. If such tools exist, I don't know about them; most likely you need a capable computer administrator/servicing guy. –  Zds Aug 22 '11 at 13:06
It would be nice if such a tool exists because it's certainly possible to determine this automatically: If I can tell from the output of top, so can a computer. This isn't Mona Lisa's Smile, it's just crunching some numbers to find "bad" ones. –  Aaron Digulla Aug 22 '11 at 15:39
add comment

Based on the 400% usage, I'll assume that you have a quad-core processor. Your load average is almost double the capacity and half of the processes are waiting for CPU.

First, renice your shell to 0 or -10 to get a more responsive system, and then use htop to find the offending process(es) and follow that with strace on a given process. Other tools that could be useful are:

  • vmsat
  • sar
  • iostat
  • pmap
share|improve this answer
add comment

A sluggish mouse could also be due to a too high interrupt load, or, USB controllers being very busy (I assume it's a USB mouse).

share|improve this answer
Any tools which tell me which driver/component causes the high IRQ load? –  Aaron Digulla Aug 22 '11 at 11:50
add comment

vmstat could help you in general terms. An example of use is:

$ vmstat
procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu----
 r  b   swpd   free   buff  cache   si   so    bi    bo   in   cs us sy id wa
 1  0      0 977908 426184 1543884    0    0    38    45  106  385  4  1 95  1

You can run it every X seconds as well -- just add the number X after the command.

Edit: In view of comment... Write the following to a file and make that file executable. It will tell you the top 3 processes on the machine.

top -n 1 | tail -16 | head -4 | awk '{print $13}'

If you wanted to know which hogged memory as opposed to CPU, then read the top man page and change the order of display.

share|improve this answer
I'm looking for something more high level. It should run vmstat and analyze the numbers for me, so I don't have to know what "cs" means and whether a big "cs" is "good" or "bad". –  Aaron Digulla Aug 22 '11 at 11:50
add comment

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.