Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

Yesterday I've tried fedora live 15, when I would leave fedora I made a restart, but instead of restart fedora turned off the laptop. I let my laptop in that way until today, but right now when I try to turn on by the power button it shows all LEDs like it was turn on, but the screen stays in black. Someone can say what happened or what can I do about that?

share|improve this question

migrated from serverfault.com Aug 26 '11 at 14:29

This question came from our site for professional system and network administrators.

1  
A livecd should not have affected your system in any way. I'm tempted to suggest removing the battery and unplugging the power supply, removing the fedora live disk, and booting it up again. –  Journeyman Geek Aug 26 '11 at 14:35
    
If you get power and the screen stays black it could be a POST issue. –  MaQleod Aug 26 '11 at 14:55

1 Answer 1

What operating system do you have?

I suggest taking out the battery, and then pressing and holding the power button for a couple of seconds. Then put the battery back in and boot. Don't forget to take out the cd as well.

I you cannot boot after that, i suggest contacting the vendor of the laptop. Oh and what kind of laptop is it?

share|improve this answer
    
I've already tryed that, but nothing happening. The laptop is a compal FL90 and the operating systems installed on it are windows 7 and debian. –  user95648 Aug 26 '11 at 14:50
    
Try connecting an external screen on your laptop. It might also be a hardware problem, in which case you should open up the laptop and firstly check if everything is still correctly connected.. Difficult to diagnose, but here's another page about this problem: tips4pc.com/articles/computer%20troubleshooting/… –  glenn Aug 26 '11 at 15:01

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.