Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

Windows 7 and Vista has a feature called Projection Mode triggered from Windows key + P.

My problem is that the primary display (connected via DVI-D) is identified as the projector (and has been assigned the number 2 even though I have selected it to be the primary monitor) and that the projector is identified as the screen (and assigned number 1).

How can I switch these around so that the projector is properly identified as the projector and the screen as the screen?

share|improve this question

On my Thinkpad T42 my DVI output didn't work while connected docked in my docking station. What helped to use it properly was to boot with it connected. Maybe this will help you out as well:

  1. Shutdown your Windows (power off)
  2. Plug in your DVI screen
  3. Boot (your DVI should display as your only and primary screen)
  4. Plug in your projector after Windows booted properly

Your projector should now apper as secondary display when select "extended view" for the projector to get a signal as well.

share|improve this answer
Hm. No good. The ordering is still wrong. – Aeyoun Sep 22 '11 at 21:34

How to set a monitor as the primary display - Windows 7

  1. Right-Click on an empty space on the desktop
  2. Click on Screen Resolution
  3. Click on Identify
    • Notice the number displayed on the device you want as your primary display
  4. Click on the Display drop-down menu
  5. Select the device that you want to be your primary display
  6. Check the Make this my main display box
  7. Click on OK

Note: Steps are in detail for both the experienced and non-experienced.

share|improve this answer
As I say, the monitor has already been set as the primary monitor. What Windows gets wrong is which of the monitors is the projector. – Aeyoun Aug 30 '11 at 10:39
up vote 0 down vote accepted

Only way to do it in a way that is remembered by the OS for more than a sessions is by using adapters to fit the cables into what the graphic card insists is the first port.

share|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.