Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

Will a processor socket with bent / broken off pins still work if the processor still sits in it ok? Purely hypothetical.

share|improve this question

2 Answers 2

up vote 7 down vote accepted

The pins are there for a reason so if any are missing or making poor contact then it's likely to cause some form of problem - permanent or intermittent.

Just for elaboration: you may get lucky if the broken pin/socket is a ground or power one as there's more than one of those, but the power and ground contacts are spread out to share the power load and to cut down on electrical noise so the CPU may still not work properly. If it's a broken data, address, timing or control contact then you're probably out of luck.

share|improve this answer
    
Thanks, especially for the second paragraph. –  Ciaran Sep 9 '11 at 20:38

If any pins are broken off then the processor won't work - there'll be a missing connection. As with an electrical or data connection if it's not there then the processor can't work.

If any pins are bent, then as long as the processor still fits in the socket it should still work as there will be all the connections present.

share|improve this answer
    
It's like a leg. Bent is ok. Broken off is SOL. –  surfasb Sep 5 '11 at 16:45
3  
FYI, I have used an AMD FX-55 that had a broken pin with success. The lost pin (2nd from corner IIRC) was responsible for one of the RAM channels, so the PC would only boot with DIMMs in slot 1 & 3 and wouldn't POST with DIMMs in the other channel (slots 2 & 4). Not ideal as the missing RAM channel essentially caused a bottleneck - halving the speed of the computer. :) –  deizel Sep 5 '11 at 17:05

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.