Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

Wikipedia has a page for it, but even then the technical definition seemed a bit over my head. Can anyone describe in easier terms for what this is?

share|improve this question

closed as not constructive by random Oct 10 '11 at 12:32

As it currently stands, this question is not a good fit for our Q&A format. We expect answers to be supported by facts, references, or expertise, but this question will likely solicit debate, arguments, polling, or extended discussion. If you feel that this question can be improved and possibly reopened, visit the help center for guidance.If this question can be reworded to fit the rules in the help center, please edit the question.

    
Short description..."wicked fast storage interface" in its day, replaced by SAS these days. Serial Attached SCSI –  Moab Sep 18 '11 at 14:24

3 Answers 3

up vote 3 down vote accepted

This is tricky question, because a number of different technologies have used the SCSI name over the years: SCSI, Ultra-wide SCSI (1 through 3), SCSI (again), iSCSI, and SAS (serial attached SCSI). What they all have in common is they are used in mid to high-end servers for hard drive connections. You can think of it as an alternative to IDE or SATA.

Of all those, only SAS and iSCSI are current. SAS is actually very similar to SATA. The main difference is that it supports hot swapping and that SAS drives are typically more robust (more reserve sectors). iSCSI is a networking specification used for connecting volumes (hard drive/raid paritions) from SAN or NAS devices over the network.

share|improve this answer

SCSI is a way to connect disks, tape-drives, scanners and other devices to computers. There are several main parts

  • SCSI cables
  • SCSI connectors
  • SCSI host adapters (often a card that plugs into a slot on the motherboard)
  • SCSI peripherals (e.g. a SCSI disk-drive)

There are a set of standards that define the cables, the electrical interfacing and the commands that travel over the cables.

SCSI has always been more sophisticated than it's main rival and has therefore been more expensive. SCSI devices generally provide significantly higher performance, longer cables and more devices per controller. Because of the cost, use of SCSI has been mainly restricted to servers and high-performance systems.

Over the years, new versions of the SCSI standards are released. Sometimes there is limited interoperability with devices conforming to a prior SCSI standard.

share|improve this answer

In plain English, SCSI is a technical spec for storage, usually hard drives and optical drives. As you've noted, there's a description in Wikipedia. SCSI was used in higher end computing equipment, particularly workstations and servers, but was usually more expensive than competing standards, such as IDE, and thus failed to capture significant marketshare.

share|improve this answer
2  
"failed to capture significant marketshare"? All the servers I've used or purchased (including for customers) over the last twenty years had SCSI. It is true that desktop PCs invariably used the cheapest disk interface (IDE/ATA). –  RedGrittyBrick Sep 18 '11 at 10:01
    
Not alway. I remember using SCSI in my Amiga, my Intel PC (a 386SX), and my first four servers. –  Hennes Apr 22 '13 at 13:10

Not the answer you're looking for? Browse other questions tagged or ask your own question.