Take the 2-minute tour ×
Super User is a question and answer site for computer enthusiasts and power users. It's 100% free, no registration required.

I recently read that the only difference between DVI and VGA is that DVI is digital whereas VGA is an analog signal. This means it might gain noise along the way or if the cable is cheap. I currently convert from DVI (the only output my GPU gives) to VGA directly out of the GPU, and then pass the signal to my two screens through a VGA cable. The cable itself is not too long, but the screens are big and that might cause some trouble. Would it be wiser to use DVI cables and converting to VGA (the only input my monitors can take) right before the monitor?

share|improve this question
    
Does it look okay? Then don't bother changing anything. –  Shinrai Sep 27 '11 at 18:30
3  
Your not converting the signal in any configuration. The DVI connector on your GPU includes the ability to output an analog signal and does so when you connect to a VGA monitor. –  Brian Sep 27 '11 at 18:44
    
@Shinrai I can't really tell since this is how it's always been. –  Gabriele Cirulli Sep 27 '11 at 18:51
    
@Brian Are you sure? I've used 2 converters which connect to the DVI out and have a connector for a VGA cable. –  Gabriele Cirulli Sep 27 '11 at 18:52
1  
@GabrieleCirulli - What's he's saying is that most DVI already carries an analog VGA signal in addition to the digital one, it doesn't have to be converted. This is not ALWAYS the case but ALMOST always the case. This is why the converters (really just adapters) are small and don't require external power. Your adapters could POTENTIALLY introduce a signal strength issue but it's incredibly unlikely; hence my initial comment. You're very unlikely to see a difference. –  Shinrai Sep 27 '11 at 19:24
show 1 more comment

1 Answer 1

up vote 3 down vote accepted

Would it be wiser to use DVI cables and converting to VGA (the only input my monitors can take) right before the monitor?

You're not really converting anything with this setup. That little adapter you're using to "convert" DVI to VGA only pulls VGA pins that are already within your DVI port out. According to this, you're using a DVI-I connector from your video card.

Since your monitors only take a VGA signal, you don't really have options here. Unless you wanted to find some horrible device to convert a DVI-D (actually digital) to Analog for you between your video card and your monitor. Hint: That'll suck, the video card doing the conversion is as good as it gets.

The only thing you can do to improve the quality from this point is find better cables (and shorter). But, if it looks good, then you don't need to spend any more time on this.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.