Super User is a question and answer site for computer enthusiasts and power users. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I try to connect two VMware (with WinXP) on/inside on host computer(with windows 7). The configurations are:

VM1: network adapter - host-only with ip address: 192.168.10.50
VM2: network adapter - host-only with ip address: 192.168.10.100

Host computer: Property of VMnet1 192.168.10.250

Virtual Network Editor; VMnet1 - hostonly, connect a host virtual adapter t this network, DHCP is deactivated.

Finally what i get is:

in VM1:

both ping 192.168.10.100 and ping 192.168.10.250 work,

in VM2:

only ping 192.168.10.250 works, but ping 192.168.10.50 not works

in Host computer

only ping 192.168.10.100 works, but ping 192.168.10.50 not works

What's the problem with VM2. Which configuration should i check?

BTW, the version of my VMware Workstation is 7.

share|improve this question

migrated from serverfault.com Sep 30 '11 at 20:50

This question came from our site for system and network administrators.

Since both the hosts and guests are to be on the same subnetwork, you should be using "bridged" networking configuration here and all devices will be able to communicate if they're using the same network and subnet mask.

share|improve this answer

You must log in to answer this question.